
Chapter 5 Hardware Diagnostic Tests
Displaying Hardware Errors
card(9) | none |
card(10) | none |
card(11) | none |
card(12) | none |
card(13) | none |
card(14) | none |
card(15) | none |
card(17) | none |
fan(1) | none |
fan(2) | none |
fan(3) | none |
fan(4) | none |
Step 6 Reboot the chassis when the self-test is complete.
System configuration is modified. Save? [yes(default) no filename] y
Proceed with reload? [yes(default) no] y
Displaying Hardware Errors
To display POST results,
To display hardware errors, follow these steps:
Step 1 Locate the /topspin/log/hwif_log file by entering the more syslog:hwif_log command.
| enable | ||||
| more syslog:hwif_log | ||||
| Thu Mar | 4 | 10:57:49 2004: POST: SEEPROM: PASSED | ||
| Thu Mar | 4 | 10:57:49 2004: POST: FPGA: PASSED | ||
| Thu Mar | 4 | 10:57:49 2004: POST: SUMMIT: PASSED | ||
| Thu Mar | 4 | 10:57:50 2004: POST: RTC: PASSED | ||
| Thu Mar | 4 | 10:57:54 2004: POST: FAN: PASSED | ||
| Thu Mar | 4 | 10:57:54 2004: card_startup.x : card is starting up | ||
|
|
| Cisco SFS 7000P Hardware Installation Guide |
|
|
|
|
|
| ||
|
|
|
|
| |
|
|
|
|