Chapter 3 Installing Field Replaceable Units
Installing a Power Supply or Fan Unit
Figure 3-2 Removing the Power Supply from the Switch
154011
Step 4 Insert the new power supply or fan unit into the open slot until it is fully seated. You may need to push the unit with your thumbs to get it completely into the bay.
Step 5 Secure fasteners with a number 1 Phillips screwdriver.
Step 6 Check the LEDs to verify the status of the module.
For more information, see the “Power Supply and Fan LEDs” section on page
|
| Cisco SFS 7000P Hardware Installation Guide |
|
|
|
|
| ||
|
|
| ||
|
|
|
