Chapter 1 Product Overview

Administrative Features

Manufacturing part number

Serial number

Final test date

Card ID

Failure code

Failure date

Operation status

Failure log

OEM part number

Diagnostics

The following tests are used to determine operational status:

Power-on self-test (POST) is performed on all system components and is required during power-on to determine operational readiness.

Test to check the redundant components’ operational status periodically during normal operation, including the logic required to perform the transition from faulted or primary to redundant component. The detection of an abnormal status is reported.

Concurrent port loopback tests are available, including the capability to wrap an external signal from input port to output port.

Refer to Chapter 5, “Hardware Diagnostic Tests,” for more detailed information.

 

Cisco SFS 7000P Hardware Installation Guide

1-6

OL-9167-01 Rev. A0

Page 30
Image 30
Cisco Systems Cisco SFS 7000P manual Diagnostics