Chapter 2 Installing the Cisco SFS 7000P Switch

Rack-Mounting the Cisco SFS 7000P Switch

Figure 2-4 Holding Bracket Against Inside of Rack

144954

Note If you are rack-mounting the switch backward, the bracket should be installed to the front of the rack.

b.Secure the bracket with your screws through the back of the rack, as shown in Figure 2-5.

c.Repeat on both sides of the rack.

 

Cisco SFS 7000P Hardware Installation Guide

2-8

OL-9167-01 Rev. A0

Page 38
Image 38
Cisco Systems Cisco SFS 7000P manual Holding Bracket Against Inside of Rack