Cisco Systems Cisco SFS 7000P manual InfiniBand Port LEDs, Color Indication

Chapter 4 Managing the Cisco SFS 7000P Switch

LEDs

Table 4-1	Interpreting the Chassis Status LED
Color		Indication
Off		No system power or LED failure.
Yellow (solid)		Operator intervention required. An system error was detected,
		such as a fan error, a POST failure, or a power supply failure.
		The ! label (available on the back of the chassis) indicates a
		failure.
Yellow		Initiated automatically during the LED test that follows the
(blinking)		application of power (16 seconds).
Solid green		Indicates proper operation and no critical errors.

InfiniBand Port LEDs

The InfiniBand port LED is located next to each InfiniBand port. The InfiniBand LED represents the logical link and the logical link activity. For InfiniBandport LED locations, see Figure 4-1.

Figure 4-1 InfiniBand Port LEDs Location

Port LEDs

154013

For information on interpreting the InfiniBand Port LED, see Table 4-2.

Table 4-2 InfiniBand Port LED

		Color	Indication
		Off	Logical link has not been established.
		Solid green	Logical link has been established.
		Blinking green	Logical link was established with activity.
	Cisco SFS 7000P Hardware Installation Guide
4-2			OL-9167-01 Rev. A0