Alloy Computer Products RNS8, RNS5 user manual Hardware Installation, Installation and Testing

Page 15

Hardware Installation

The following figure illustrates a typical application of RNS5/8 Industrial 5-port/8-port Ethernet Rail Switch.

Installation and Testing

1.Take your RNS5/8 Industrial 5-port/8-port Rail Switch out of the package box.

2.Check if the DIN-Rail clip is attached to the RNS5/8. If the DIN-Rail clip is not attached to the RNS5/8, refer to DIN-Rail Mounting section for DIN-Rail installation. If you want to wall-mount the RNS5/8, refer to Wall Mounting section for wall mounting installation.

3.To place the RNS5/8 on the DIN-Rail track or wall, refer to the Mounting Installation section.

Image 15

Contents User’s Manual Industrial 5-port/8-port Ethernet Rail SwitchContent Introduction FeaturesPackage Checklist 54mm x 135mm x 105mm DimensionsHardware Description Front PanelPage Bottom View Wiring the DC Power InputsFDX/COL of Port LED IndicatorsStatus Description LNK/ACT of PortLNK/ACT of Port 7/8 Port LED Status DescriptionPort Status Port To PortFDX/COL of Port 7/8 PortsCabling Pin MDI-X Signals MDI SignalsDIN-Rail Mounting Mounting InstallationPage Wall Mounting Installation and Testing Hardware InstallationPage Page Page Trouble shooting Transmission StandardsProtocols TechnologyTemperature Power SupplyPower InstallationIEC60068-2-6 Vibration