Alloy Computer Products RNS8, RNS5 Port LED Status Description, Port Status Port, To Port

Page 9

Port LED

Status

Description

 

 

 

 

Orange

The port is operating in full-duplex

 

mode.

 

 

 

 

 

 

Blinking

Collision of Packets occurring.

 

orange

 

 

 

 

 

Port Status (Port 1

Off

The port is in half-duplex mode or

to Port 4)

no device is attached.

 

 

 

 

 

Green

A network device is detected.

 

 

 

 

Blinking

The port is transmitting or receiving

 

green

packets from the TX device.

 

 

 

 

Off

No device is attached.

 

 

 

Table 1

There are 7 diagnostic LEDs and 12 Port LEDs located on the Front panel of RNS8 Industrial Ethernet Rail Switch. These LED indicators provide administrators with real-time system status. Table 2 gives descriptions of the function of each LED indicator.

 

LED

Status

Description

 

 

 

 

 

PWR

Green

Power is on.

 

 

 

 

 

Off

No power is being supplied.

 

 

 

 

 

PWR 1

Green

Power is on.

 

 

 

 

 

Off

No power is being supplied.

 

 

 

 

 

PWR 2

Green

Power is on.

 

 

 

 

 

 

 

 

 

Off

No power is being supplied.

 

 

 

 

 

LNK/ACT of Port 7/8

Green

A network device is detected.

 

 

 

 

 

 

 

7

Image 9
Contents User’s Manual Industrial 5-port/8-port Ethernet Rail SwitchContent Introduction FeaturesPackage Checklist Hardware Description DimensionsFront Panel 54mm x 135mm x 105mmPage Bottom View Wiring the DC Power InputsStatus Description LED IndicatorsLNK/ACT of Port FDX/COL of PortPort Status Port Port LED Status DescriptionTo Port LNK/ACT of Port 7/8FDX/COL of Port 7/8 PortsCabling Pin MDI-X Signals MDI SignalsDIN-Rail Mounting Mounting InstallationPage Wall Mounting Installation and Testing Hardware InstallationPage Page Page Trouble shooting Protocols StandardsTechnology TransmissionPower Power SupplyInstallation TemperatureIEC60068-2-6 Vibration