Alloy Computer Products RNS8, RNS5 user manual Bottom View, Wiring the DC Power Inputs

Bottom View

The bottom view of the RNS5/8 Industrial 5-port/8-port Ethernet Rail Switch consists of one terminal block connector with two DC power inputs, Alarm output and one DC IN power jack for an additional AC/DC power adapter.

Figure B. Bottom view of the RNS5/8 Industrial 5-port/8-port Ethernet Rail Switch

Wiring the DC Power Inputs

Follow the steps below to wire RNS5/8 dual DC power inputs.

[Note] The suitable electric wire ranges from 12 to 24 AWG.

V- V+ V- V+

1.Insert the positive and negative wires into the V+ and V- contacts respectively of the terminal block connector

2.Tighten the wire-clamp screws to prevent the DC wires from being loosened.

[Note] The additional power jack is designed5 for office use.