(3) Configuring RAID set in RAID BIOS
Enter the RAID BIOS setup utility to configure a RAID array. Skip this step and proceed to Section 4 if you do not want to create RAID.
Step 1:
After the POST memory test begins and before the operating system boot begins, look for a message which says "Press
RAID BIOS Version 2.5.1540.32
(c)2006 ATI Technology, Inc. All rights reserved. No Array is defined..............................
Press
Figure 3
Step 2:
Main Menu
This is the first option screen when you enter the ATI BIOS RAID Setup utility. (Figure 4).
To view the disk drives assigned to arrays, press <1> to enter the View Drive Assignments window. To create an array, press <2> to enter the Define LD window.
To delete an array, press <3> to enter the Delete LD window.
To view controller settings, press <4> to enter the Controller Configuration.
FastBuild (tm) Utility (c) 2006 ATI Technology, Inc.
[ Main Menu] ] |
|
View Drive Assignments | [ 1 ] |
Define LD | [ 2 ] |
Delete LD | [ 3 ] |
Controller Configuration | [ 4 ] |
[ Keys Available] |
|
Press 1..4 to Select Option | [ESC] Exit |
Figure 4
English
- 61 - | Appendix |