AMX VTM-D15/A Installation and Wiring, Setting up the AXB-TPI/3, Installing the input modules

Page 15

Installation and Wiring

Installation and Wiring

This section covers the steps necessary to setup the individual MultiMedia components and connect them together. The three areas of focus ar the main component setup, wiring, installation, and connection.

Setting up the AXB-TPI/3

The AXB-TPI/3 does not come pre-installed with any input modules. The card provided with the original system package is the TP3-VID Composite/S-Video Input Module. The TPI/3 can be configured with any combination of 3 input cards (TP3-RGB, TP3-VGA, and/or TP3-VID).

Installing the input modules

1.Discharge the static electricity from your body by touching a grounded metal object.

Always power down the TPI/3 before attempting to remove or install input modules.

Failure to do so could result in damage to the TPI/3 and/or input modules.

2.Disconnect any connectors from the AXB-TPI/3.

3.Remove (counter-clockwise) the two-black thumbscrews on the slot cover corresponding to the location being used for the inserted input module. Any module can be inserted into any slot number.

4.Gently insert the module into the brackets inside the card slot and slide the input module into the enclosure until you feel it contact the slot connector, as shown in FIG. 5.

FIG. 5 Inserting an input module

5.Screw in (clockwise) the two thumbscrews to secure the module.

6.Repeat steps 3 through 5 to insert other input modules, if necessary.

Removing input modules

1.Disconnect any power supply connected to the TPI/3.

Always power down the TPI/3 before attempting to remove or install input modules.

Failure to do so could result in damage to the TPI/3 and/or input modules.

VTM-D15/A 15" MultiMedia Touch Panel Systems

11

 

 

 

 

Image 15
Contents VTM-D15/A AMX Limited Warranty and Disclaimer Table of Contents Upgrading the TPI/3 Firmware MultiMedia System Components MultiMedia Touch PanelPin Mini Din to 9-pin DB9 Touch Panel Signal Cable Power AdapterPower Cord Pin DB15 VGA Signal CableFloppy Disk VTM-D15/A and VTM-D15/AB SpecificationsSpecifications PSN6.5 Power Supply optionalIBM VGA Rear component connection locations on the VTM-D15/A VTM-D15/A and VTM-D15/AB Rear ComponentsAXB-TPI/3 Specifications Dimensions HWDFront Panel Rear Panel Components SendCommands Rgbhv AXB-TPI/3 ComponentsPin captive-wire VTM-D15/A Sample ConfigurationRemoving input modules Installation and WiringSetting up the AXB-TPI/3 Installing the input modulesMounting the TPI/3 in an equipment rack Setting up the PanelInstalling the Table Top support bracket Table Top Installation VTM-D15/A and D15/ASFixing holes on each side of pull-out flap Surface Mount Installation VTM-D15/AB and D15/ASB Connecting the cables on a VTM-D15/A table top panelInstalling the Surface Mount support bracket Surface Mounting Kit VTM-WMB contents Rear of VTM-D15/AB shown with attached VTM-WMB bracket Connecting the cables on a VTM-D15/AB surface mount panelPreparing captive wires Wiring the AXB-TPI/3Using the AXlink connector for data and power Wiring guidelinesPin Signal Function Connecting the MultiMedia ComponentsUsing the VGA in DB-15 male high-density connector VGA in DB-15 Connector PinoutsYour system is now connected and receiving power Installation and Wiring Configuration and Setup VTM-D15/A Startup and Setup ProceduresFront Panel buttons and indicators LEDs Setting Up Serial Communication from PC to the TPI/3 Setting Up Serial proceduresUsing Axcessx for serial communication COM Port Parameter Settings Using HyperTerminal for serial communicationParameter Setting Setting up the VTM-D15/A touch device Supported Touch Devices Setting the Output ResolutionAvailable Resolutions Resolution Refresh RatesSetting Up AXlink Communication from Master to the TPI/3 Setting Up AXlink proceduresCalibrating the Monitor Using Axcessx for AXlink communication Using HyperTerminal for AXlink communicationSetting up the VTM-D15/A touch device through AXlink Use the following command to set the mouse driver Setting Up NetLinx Communication from PC to the TPI/3Set the Output resolution of the TPI/3 by entering Using NetLinx Studio for communication via an COM Port SendCommand 130,’calibrate’ Configuration and Setup Configuration Upgrading the TPI/3 FirmwareDownloading the Firmware Press F10 to exit the SoftROM program On Screen Display OSD Features On Screen Display OSD IconsOn Screen Display OSD Icons Selecting the Language of the OSD Exiting the OSDAdjusting Display Performance Phase and Clock Adjusting Screen Brightness and ContrastSelecting the Picture Color Temperature Adjusting Horizontal and Vertical Screen PositionAdjusting OSD Menu Parameters OSD Position and Timer Adjusting Display Color Red, Green, BlueAdjusting the OSD Timer setting Adjusting the Picture SharpnessOptimizing Picture Performance in DOS Graphic/Text Automatic Contrast AdjustmentReturning Recall to Factory Default Settings Troubleshooting Display TroubleshootingTroubleshooting Use these messages to address panel issues Troubleshooting VTM-D15/A 15 MultiMedia Touch Panel Systems AMX reserves
Related manuals
Manual 52 pages 47.78 Kb

VTM-D15/A specifications

The AMX VTM-D15/A is a next-generation armored vehicle designed for versatility and adaptability in modern combat scenarios. Developed to meet the evolving demands of modern military operations, it embodies advanced technologies and exceptional characteristics that make it a standout choice for armed forces worldwide.

At the heart of the AMX VTM-D15/A is its robust chassis, designed to withstand harsh terrains and explosive devices. The vehicle boasts a well-protected hull using advanced composite materials and ballistic plating, ensuring crew safety in hostile environments. It can be fitted with reactive armor systems that enhance protection against projectiles and anti-tank missiles.

The VTM-D15/A features a powerful engine that provides high mobility across various landscapes, capable of reaching speeds of up to 100 km/h on flat terrain. Its off-road capabilities are complemented by a sophisticated suspension system that allows for excellent maneuverability in rugged conditions. The vehicle is also equipped with all-terrain tires, further enhancing stability and traction.

One of the remarkable aspects of the AMX VTM-D15/A is its modular design that allows for quick configuration changes between various combat roles. This adaptability permits the integration of different weapon systems, including machine guns and anti-tank guided missiles, that can be rapidly mounted or dismounted as per operational requirements.

The vehicle's advanced battlefield management system improves situational awareness, allowing for real-time data sharing and communication with other units. It is equipped with state-of-the-art sensors and reconnaissance tools, ensuring that it can gather intelligence and operate effectively in diverse combat environments.

Moreover, the AMX VTM-D15/A emphasizes crew comfort and ergonomics, featuring a spacious interior designed for extended missions. The vehicle's climate control systems and noise-reduction technologies significantly enhance crew endurance and focus in prolonged operations.

In a world where military operations are increasingly dynamic, the AMX VTM-D15/A stands out as a versatile, powerful, and technologically advanced armored vehicle. Its combination of protection, mobility, and adaptability ensures that it can meet a wide array of mission requirements, making it a vital asset in modern military arsenals.