AMX VTM-D15/A instruction manual Using NetLinx Studio for communication via an COM Port

Page 36

Configuration and Setup

19.Press the screen to exit from the calibration session and return to the panel display.

20.Select Connect > Disconnect to exit from telnet session and close the NetLinx Studio Program.

Using NetLinx Studio for communication via an COM Port

If the NXC-ME260 is not connected to a network via an Ethernet port, communication can then only be established through the use of a COM Port.

1.Connect one end of an RS-232 (DB-9) cable from the selected Program Port on the from of the NetLinx Master to the Program Port on the front of the TPI/3. Refer to the individual NetLinx Master instruction manual for more detailed setup and configuration information. In this section, an NXC-ME260 will be used for example purposes.

2.Launch the NetLinx Studio program from the Start > Programs > AMX Control Disc > NetLinx > NetLinx Studio folder.

3.From the Main menu bar, select Tools > Master Comm. Settings to display the Communication Setting dialog box.

4.Select NetLinx from the Platform section.

5.Select the PC COM Port (from the COM Port drop-down menu) that is being used to communicate to the NXC-ME260.

6.Click Configure and select the baud rate that the master is using. The default is 38.4.

7.Set the Flow Control to NONE and click OK to accept the changes and exit the Communication Setting dialog box.

8.Select Tools > Terminal from the Main menu bar.

9.Press ENTER four times to establish communication with the Master Controller and the terminal.

10.Use the following command to set the mouse driver:

Send_Command, <TPI/3 device number>,"’@MOU <# for touch driver>’"

Example:

Send_Command 130,"’@MOU 12’"

This command allows you to set the mouse driver number (#12 for VTM-D15/A) on the TPI/3 device using a specific Device ID number (#130). The Supported Touch Devices table on page 27 lists the supported touch devices and their associated ID’s. When

PRGM EX. 13

11.Set the Output resolution of the TPI/3 by entering:

Send_Command, <TPI/3 device number>,"’@res <hor>x<ver>:<res>’"

Example:

Send_Command 130,"’@res 1024x768’"

Sets up the panel to display an output resolution of 1024 x 768 at a default screen refresh rate of 60. If another refresh rate is needed, enter a colon after the vertical value and then enter the refresh rate value.

PRGM EX. 14

12.Refer to the Available Resolutions table on page 27 for information on resolution and refresh rates.

13.Calibrate the TPI/3 by entering:

 

32

VTM-D15/A 15" MultiMedia Touch Panel Systems

 

 

 

Image 36
Contents VTM-D15/A AMX Limited Warranty and Disclaimer Table of Contents Upgrading the TPI/3 Firmware MultiMedia Touch Panel MultiMedia System ComponentsPower Adapter Power CordPin DB15 VGA Signal Cable Pin Mini Din to 9-pin DB9 Touch Panel Signal CableVTM-D15/A and VTM-D15/AB Specifications SpecificationsPSN6.5 Power Supply optional Floppy DiskIBM VGA VTM-D15/A and VTM-D15/AB Rear Components Rear component connection locations on the VTM-D15/AAXB-TPI/3 Specifications Dimensions HWDFront Panel Rear Panel Components SendCommands AXB-TPI/3 Components RgbhvVTM-D15/A Sample Configuration Pin captive-wireInstallation and Wiring Setting up the AXB-TPI/3Installing the input modules Removing input modulesSetting up the Panel Mounting the TPI/3 in an equipment rackTable Top Installation VTM-D15/A and D15/AS Installing the Table Top support bracketFixing holes on each side of pull-out flap Surface Mount Installation VTM-D15/AB and D15/ASB Connecting the cables on a VTM-D15/A table top panelInstalling the Surface Mount support bracket Surface Mounting Kit VTM-WMB contents Connecting the cables on a VTM-D15/AB surface mount panel Rear of VTM-D15/AB shown with attached VTM-WMB bracketWiring the AXB-TPI/3 Preparing captive wiresWiring guidelines Using the AXlink connector for data and powerConnecting the MultiMedia Components Using the VGA in DB-15 male high-density connectorVGA in DB-15 Connector Pinouts Pin Signal FunctionYour system is now connected and receiving power Installation and Wiring Configuration and Setup VTM-D15/A Startup and Setup ProceduresFront Panel buttons and indicators LEDs Setting Up Serial Communication from PC to the TPI/3 Setting Up Serial proceduresUsing Axcessx for serial communication COM Port Parameter Settings Using HyperTerminal for serial communicationParameter Setting Setting up the VTM-D15/A touch device Setting the Output Resolution Available ResolutionsResolution Refresh Rates Supported Touch DevicesSetting Up AXlink Communication from Master to the TPI/3 Setting Up AXlink proceduresCalibrating the Monitor Using Axcessx for AXlink communication Using HyperTerminal for AXlink communicationSetting up the VTM-D15/A touch device through AXlink Setting Up NetLinx Communication from PC to the TPI/3 Use the following command to set the mouse driverSet the Output resolution of the TPI/3 by entering Using NetLinx Studio for communication via an COM Port SendCommand 130,’calibrate’ Configuration and Setup Configuration Upgrading the TPI/3 FirmwareDownloading the Firmware Press F10 to exit the SoftROM program On Screen Display OSD Features On Screen Display OSD IconsOn Screen Display OSD Icons Exiting the OSD Selecting the Language of the OSDAdjusting Screen Brightness and Contrast Adjusting Display Performance Phase and ClockAdjusting Horizontal and Vertical Screen Position Selecting the Picture Color TemperatureAdjusting Display Color Red, Green, Blue Adjusting OSD Menu Parameters OSD Position and TimerAdjusting the Picture Sharpness Adjusting the OSD Timer settingAutomatic Contrast Adjustment Optimizing Picture Performance in DOS Graphic/TextReturning Recall to Factory Default Settings Troubleshooting Display TroubleshootingTroubleshooting Use these messages to address panel issues Troubleshooting VTM-D15/A 15 MultiMedia Touch Panel Systems AMX reserves
Related manuals
Manual 52 pages 47.78 Kb

VTM-D15/A specifications

The AMX VTM-D15/A is a next-generation armored vehicle designed for versatility and adaptability in modern combat scenarios. Developed to meet the evolving demands of modern military operations, it embodies advanced technologies and exceptional characteristics that make it a standout choice for armed forces worldwide.

At the heart of the AMX VTM-D15/A is its robust chassis, designed to withstand harsh terrains and explosive devices. The vehicle boasts a well-protected hull using advanced composite materials and ballistic plating, ensuring crew safety in hostile environments. It can be fitted with reactive armor systems that enhance protection against projectiles and anti-tank missiles.

The VTM-D15/A features a powerful engine that provides high mobility across various landscapes, capable of reaching speeds of up to 100 km/h on flat terrain. Its off-road capabilities are complemented by a sophisticated suspension system that allows for excellent maneuverability in rugged conditions. The vehicle is also equipped with all-terrain tires, further enhancing stability and traction.

One of the remarkable aspects of the AMX VTM-D15/A is its modular design that allows for quick configuration changes between various combat roles. This adaptability permits the integration of different weapon systems, including machine guns and anti-tank guided missiles, that can be rapidly mounted or dismounted as per operational requirements.

The vehicle's advanced battlefield management system improves situational awareness, allowing for real-time data sharing and communication with other units. It is equipped with state-of-the-art sensors and reconnaissance tools, ensuring that it can gather intelligence and operate effectively in diverse combat environments.

Moreover, the AMX VTM-D15/A emphasizes crew comfort and ergonomics, featuring a spacious interior designed for extended missions. The vehicle's climate control systems and noise-reduction technologies significantly enhance crew endurance and focus in prolonged operations.

In a world where military operations are increasingly dynamic, the AMX VTM-D15/A stands out as a versatile, powerful, and technologically advanced armored vehicle. Its combination of protection, mobility, and adaptability ensures that it can meet a wide array of mission requirements, making it a vital asset in modern military arsenals.