AMX VTM-D15/A instruction manual Adjusting Horizontal and Vertical Screen Position

Page 44

On Screen Display (OSD) Features

Adjusting Horizontal and Vertical Screen Position

Horizontal (H Position) and vertical (V Position) settings allow you to adjust the position of the picture. Press the button to optimize both the settings automatically. To customize the settings, follow the steps below.

1.Press any one of the UP, DOWN, INCREASE or DECREASE buttons. The first OSD menu appears.

2.Press the UP or DOWN button to highlight the Horizontal Position icon ( ), then press INCREASE or DECREASE to center the picture horizontally.

FIG. 27 Adjusting the Horizontal Screen Position

3.Press the UP or DOWN button to highlight the Vertical Position icon ( ), then press INCREASE or DECREASE to center the picture vertically.

FIG. 28 Adjusting the Vertical Screen Position

4.Exit the OSD.

Selecting the Picture Color Temperature

You can change the picture color temperature of your display. Three preset color temperature modes are available.

!9300K: recommended for general use

!6500K: recommended for color management

!5500K: recommended for photo retouch

1.Press any one of the UP, DOWN, INCREASE or DECREASE buttons. The first OSD menu appears.

2.Press the UP or DOWN button to highlight the Next Page icon ( ), then press INCREASE or DECREASE. The second menu appears.

 

40

VTM-D15/A 15" MultiMedia Touch Panel Systems

 

 

 

Image 44
Contents VTM-D15/A AMX Limited Warranty and Disclaimer Table of Contents Upgrading the TPI/3 Firmware MultiMedia Touch Panel MultiMedia System ComponentsPower Adapter Power CordPin DB15 VGA Signal Cable Pin Mini Din to 9-pin DB9 Touch Panel Signal CableVTM-D15/A and VTM-D15/AB Specifications SpecificationsPSN6.5 Power Supply optional Floppy DiskIBM VGA VTM-D15/A and VTM-D15/AB Rear Components Rear component connection locations on the VTM-D15/AFront Panel AXB-TPI/3 SpecificationsDimensions HWD Rear Panel Components SendCommands AXB-TPI/3 Components RgbhvVTM-D15/A Sample Configuration Pin captive-wireInstallation and Wiring Setting up the AXB-TPI/3Installing the input modules Removing input modulesSetting up the Panel Mounting the TPI/3 in an equipment rackTable Top Installation VTM-D15/A and D15/AS Installing the Table Top support bracketFixing holes on each side of pull-out flap Installing the Surface Mount support bracket Surface Mount Installation VTM-D15/AB and D15/ASBConnecting the cables on a VTM-D15/A table top panel Surface Mounting Kit VTM-WMB contents Connecting the cables on a VTM-D15/AB surface mount panel Rear of VTM-D15/AB shown with attached VTM-WMB bracketWiring the AXB-TPI/3 Preparing captive wiresWiring guidelines Using the AXlink connector for data and powerConnecting the MultiMedia Components Using the VGA in DB-15 male high-density connectorVGA in DB-15 Connector Pinouts Pin Signal FunctionYour system is now connected and receiving power Installation and Wiring Front Panel buttons and indicators LEDs Configuration and SetupVTM-D15/A Startup and Setup Procedures Using Axcessx for serial communication Setting Up Serial Communication from PC to the TPI/3Setting Up Serial procedures Parameter Setting COM Port Parameter SettingsUsing HyperTerminal for serial communication Setting up the VTM-D15/A touch device Setting the Output Resolution Available ResolutionsResolution Refresh Rates Supported Touch DevicesCalibrating the Monitor Setting Up AXlink Communication from Master to the TPI/3Setting Up AXlink procedures Setting up the VTM-D15/A touch device through AXlink Using Axcessx for AXlink communicationUsing HyperTerminal for AXlink communication Setting Up NetLinx Communication from PC to the TPI/3 Use the following command to set the mouse driverSet the Output resolution of the TPI/3 by entering Using NetLinx Studio for communication via an COM Port SendCommand 130,’calibrate’ Configuration and Setup Downloading the Firmware ConfigurationUpgrading the TPI/3 Firmware Press F10 to exit the SoftROM program On Screen Display OSD Icons On Screen Display OSD FeaturesOn Screen Display OSD Icons Exiting the OSD Selecting the Language of the OSDAdjusting Screen Brightness and Contrast Adjusting Display Performance Phase and ClockAdjusting Horizontal and Vertical Screen Position Selecting the Picture Color TemperatureAdjusting Display Color Red, Green, Blue Adjusting OSD Menu Parameters OSD Position and TimerAdjusting the Picture Sharpness Adjusting the OSD Timer settingAutomatic Contrast Adjustment Optimizing Picture Performance in DOS Graphic/TextReturning Recall to Factory Default Settings Troubleshooting TroubleshootingDisplay Troubleshooting Use these messages to address panel issues Troubleshooting VTM-D15/A 15 MultiMedia Touch Panel Systems AMX reserves
Related manuals
Manual 52 pages 47.78 Kb

VTM-D15/A specifications

The AMX VTM-D15/A is a next-generation armored vehicle designed for versatility and adaptability in modern combat scenarios. Developed to meet the evolving demands of modern military operations, it embodies advanced technologies and exceptional characteristics that make it a standout choice for armed forces worldwide.

At the heart of the AMX VTM-D15/A is its robust chassis, designed to withstand harsh terrains and explosive devices. The vehicle boasts a well-protected hull using advanced composite materials and ballistic plating, ensuring crew safety in hostile environments. It can be fitted with reactive armor systems that enhance protection against projectiles and anti-tank missiles.

The VTM-D15/A features a powerful engine that provides high mobility across various landscapes, capable of reaching speeds of up to 100 km/h on flat terrain. Its off-road capabilities are complemented by a sophisticated suspension system that allows for excellent maneuverability in rugged conditions. The vehicle is also equipped with all-terrain tires, further enhancing stability and traction.

One of the remarkable aspects of the AMX VTM-D15/A is its modular design that allows for quick configuration changes between various combat roles. This adaptability permits the integration of different weapon systems, including machine guns and anti-tank guided missiles, that can be rapidly mounted or dismounted as per operational requirements.

The vehicle's advanced battlefield management system improves situational awareness, allowing for real-time data sharing and communication with other units. It is equipped with state-of-the-art sensors and reconnaissance tools, ensuring that it can gather intelligence and operate effectively in diverse combat environments.

Moreover, the AMX VTM-D15/A emphasizes crew comfort and ergonomics, featuring a spacious interior designed for extended missions. The vehicle's climate control systems and noise-reduction technologies significantly enhance crew endurance and focus in prolonged operations.

In a world where military operations are increasingly dynamic, the AMX VTM-D15/A stands out as a versatile, powerful, and technologically advanced armored vehicle. Its combination of protection, mobility, and adaptability ensures that it can meet a wide array of mission requirements, making it a vital asset in modern military arsenals.