AMX AXB-IRS4 instruction manual RS-232 Protocol Commands Miscellaneous, Zapall, ZAP!Dev

Page 20

Programming

RS-232 Protocol Commands (Miscellaneous)

Command	Description

ECHO OFF	Disable the terminal character's echo function.

ECHO ON	Enable the terminal character's echo function.

HELP	Display the on-line help menu.

MEM	Display the current amount of available memory.

VER	Display the current software version of the AXB-IRS4.

ZAP!(Dev)	Clear the specified device's IR data, and re-initialize CTON CTOF to their default val-
	ues.Example:ZAP!(1)Clears IR load on device 1, and sets CTON and CTOF to 5.

ZAPALL!	Clear all device's IR data, and re-initialize CTON and CTOF to their default values.
	Example:
	ZAPALL!
	Clears all four devices' IR load, and sets CTON and CTOF to 5.

	16	AXB-IRS4 IR/Serial Interface (4 Ports)

Image 20

Contents AXB-IRS4 AMX Limited Warranty and Disclaimer Table of Contents Table of Contents Specifications AXB-IRS4 SpecificationsProduct Information Front panel componentsFront and rear views of the AXB-IRS4 Configuration and Installation Setting the Device DIP SwitchSetting the Carrier/BAUD DIP switch Device DIP Switch SettingsPositions 1-4 Carrier signal enable/disable Position 5 RS-232/PCTouch modePositions 6-8 Baud rate setting RS-232 Baud Rate SettingsRS232 communication Removing the circuit cardAXlink communication Wiring the AXB-IRS4 Wiring GuidelinesWiring Guidelines at 125 mA Preparing/connecting captive wiresUsing AXlink for data and power Using AXlink for data and a 12 VDC power supplyUsing the AXlink-to-DB-9 connector cable for a PC system DB-9 Wiring PinoutsUsing the AXlink-to-DB-25 connector cable for a PC system DB-25 Wiring PinoutsReplacing the Lithium Battery Connecting an IR deviceConnecting a serial device SER Serial device wiring diagramConfiguration and Installation Channel Setting Commands Send CommandsChannel Setting Commands Send CommandsSendcommand 2, CH,18 Sendcommand 2,CP,2Sendcommand 2,CTOF,15 Sendcommand 2,CTON,10Sendcommand IR1, XCH Sendcommand 1,SP,2Sendcommand IR1,XCH RS-232 Protocol Commands IR Output RS-232 Protocol CommandsRS-232 Protocol Commands IR Output RS-232 Protocol Commands Channel Pulse Time RS-232 Protocol Commands Channel Pulse TimeRS-232 Protocol Commands Carrier RS-232 Protocol Commands CarrierRS-232 Protocol Commands Miscellaneous RS-232 Protocol Commands MiscellaneousZapall ZAP!DevProgramming AXB-IRS4 IR/Serial Interface 4 Ports AMX reserves

RS-232 Protocol Commands (Miscellaneous)

RS-232 Protocol Commands (Miscellaneous)

VER

ZAP!(Dev)

ZAPALL!