AMX instruction manual Front and rear views of the AXB-IRS4

Page 6

Product Information

AXB-IRS4 Specifications (Cont.)

PWR connector	2-pin captive wire connector connects an external 12 VDC power supply to the
	AXB-IRS4. An external power supply should be used when the distance
	between the AXB-IRS4 and control system exceeds the wiring guidelines
	described in the Wiring Guidelines section on page 6.

Battery	Lithium battery backup for stored control commands

Enclosure type	Metal with black textured finish

Weight	1.12 lbs (508 grams)

Dimensions	1.51" x 5.55" x 5.45" (38.4mm x 141.0mm x 138.4mm)

Mounting options	• Flat surface
	• Rack mount, with optional AC-RK Rack Kit

AXlink

DEVICE

CARRIER / BAUD

IR / SERIAL

SER

GND

SER

GND

SER

GND

SER

GND

AXM / RX

AXP / TX

PWR

Front view

12VDC

Rear view

AXlink / RS-232

PWR

FIG. 1 Front and rear views of the AXB-IRS4

	2	AXB-IRS4 IR/Serial Interface (4 Ports)

Image 6

Contents AXB-IRS4 AMX Limited Warranty and Disclaimer Table of Contents Table of Contents Product Information SpecificationsAXB-IRS4 Specifications Front panel componentsFront and rear views of the AXB-IRS4 Setting the Carrier/BAUD DIP switch Configuration and InstallationSetting the Device DIP Switch Device DIP Switch SettingsPositions 6-8 Baud rate setting Positions 1-4 Carrier signal enable/disablePosition 5 RS-232/PCTouch mode RS-232 Baud Rate SettingsRemoving the circuit card AXlink communicationRS232 communication Wiring Guidelines at 125 mA Wiring the AXB-IRS4Wiring Guidelines Preparing/connecting captive wiresUsing the AXlink-to-DB-9 connector cable for a PC system Using AXlink for data and powerUsing AXlink for data and a 12 VDC power supply DB-9 Wiring PinoutsUsing the AXlink-to-DB-25 connector cable for a PC system DB-25 Wiring PinoutsConnecting a serial device Replacing the Lithium BatteryConnecting an IR device SER Serial device wiring diagramConfiguration and Installation Channel Setting Commands Channel Setting CommandsSend Commands Send CommandsSendcommand 2,CTOF,15 Sendcommand 2, CH,18Sendcommand 2,CP,2 Sendcommand 2,CTON,10Sendcommand 1,SP,2 Sendcommand IR1,XCHSendcommand IR1, XCH RS-232 Protocol Commands RS-232 Protocol Commands IR OutputRS-232 Protocol Commands IR Output RS-232 Protocol Commands Carrier RS-232 Protocol Commands Channel Pulse TimeRS-232 Protocol Commands Channel Pulse Time RS-232 Protocol Commands CarrierZapall RS-232 Protocol Commands MiscellaneousRS-232 Protocol Commands Miscellaneous ZAP!DevProgramming AXB-IRS4 IR/Serial Interface 4 Ports AMX reserves