PCS2 to AXC-INP8, PCS to Axcent, Axcent2, or Axcent3

Installation

PCS2 to AXC-INP8

Connect the PCS2 output ports to the AXC-INP8 input ports, as illustrated in FIG. 2. Follow the illustration for Input 1 through Input 8. Set the jumpers of the associated inputs on the AXC-INP8 to Switch mode. All Switch mode inputs and the Card-Frame share common GND.

AXC-INP8

GND

INP1

COM

STBY

PCS2

GND

INP2

FIG. 2 PCS2 to AXC-INP8

PCS to Axcent, Axcent2, or Axcent3

Connect the PCS output and power ports to the Axcent, Axcent2, or Axcent3 input/output (I/O) ports, as illustrated in FIG. 3. Provide 12 VDC power from the Panja system power supply or an external power supply.

		GND
Axcent
Axcent2		I/O 1
Axcent3
		I/O 2

GND (-)

12 VDC

FIG. 3 PCS to Axcent, Axcent2, or Axcent3

GND

STBY

PWR

PCS

PCS2 to Axcent, Axcent2, or Axcent3

Connect the PCS2 output and power ports to the Axcent, Axcent2 , or Axcent3 input/output (I/O) ports, as illustrated in FIG. 4.

Axcent

Axcent2

Axcent3

GND

I/O 1

I/O 2

COM

STBY

PCS2

FIG. 4 PCS to Axcent, Axcent2, or Axcent3

PCS and PCS2 Power Current Sensors	5