D-Link DES-3216 manual Management Methods, Updating Firmware, Local Console Management

Page 12

10/100 Auto Negotiation Switch User’s Guide

Management Methods

The DES-3216 supports three management methods:

∙Local Console Management

∙Telnet Management

∙D-View/ SNMP Management

Local Console Management

Local Console Management is done through the RS-232 Console port. Managing the DES- 3216 in this mode requires a direct connection between a PC and the DES-3216.

Telnet Management

Telnet is done over the network. Once the DES-3216 is on the network, you can use Telnet to log in and change the configuration.

D-View/ SNMP Management

The DES-3216 supports SNMP through D-View, D-Link’s proprietary SNMP application and through other vendors’ SNMP applications. Please refer to the appropriate documentation for instructions on installing and using D-View and other SNMP applications.

Updating Firmware

Firmware can be updated quickly and easily. See the section Software Update Menu, Chapter 5, for instructions on updating firmware.

Introduction

4

Image 12

Contents DES-3216 10/100 Auto Negotiation Switch User’s Guide Link Limited Warranty Hardware North, Central, and South America FCC Warning Wichtige Sicherheitshinweise Table of Contents Page Page About This Guide AudienceOrganization Features IntroductionFront Panel Rear PanelManagement Methods Updating FirmwareLocal Console Management Telnet ManagementInstalling the DES-3216 Installation OptionsDesktop/ Shelf Installation Power On Rack InstallationConnecting the DES-3216 to the Network Cable SpecificationsCable Diagram Connecting the DES-3216 to the DES-5024 and Hubs PortsDES-3216 to DES-3216 Connection MDI-X PortLQN LEDsPower LED DES-3216 LED PanelLED Managing the DES-3216 Local Console ManagementTelnet ∙ Data bits ∙ Parity None ∙ Stop bits ∙ Flow Control None∙ Default User Name D-Link ∙ Default Password D-Link LogHelp Message Help MessagePanel Conventions SpacebarSystem Configuration Switch Port 1-8, 9-16 ConfigurationSpanning Tree Configuration Console ProgramSnmp Management Configuration Vlan Port ManagementTrunking Port Management System Configuration Menu System ResetFactory Reset to Default Config Values System InformationSoftware Update Boot Prom Firmware VersionSystem Information Menu Hardware RevisionLAN Default Gateway Software VersionMAC Address System DescriptionSystem Reset System ResetFactory Reset Factory ResetFactory Reset Confirmation System Rate Control Advantages of Store and ForwardDisadvantages of Store and Forward Advantages of Cut-Through Disadvantages of Cut-ThroughSoftware Update Menu Software UpdateSoftware Update Transfer File Transfer through Xmodem User Account Management User Account Change MenuCreate New User Password Confirm PasswordAccess Level User NameDelete Users StatusDelete Change Password Change PasswordOld Password New PasswordSwitch Port Configuration Switch Port Configuration Menu StatePhysical Port State PrioritySpanning Tree Configuration Spanning Tree Configuration MenuSTA Operation Levels Spanning Tree AlgorithmForward Delay Time Bridge PriorityRoot Cost Hello TimeRoot Port User Selective STA parametersSnmp Management Configuration Snmp Management Configuration MenuSnmp Manager Setting Access RightSnmp Community String Snmp Trap Manager Setting Authentication FailureCold Start Link Change EventPage Vlan Port Management Vlan Port Management MenuVlan Port Management menu Create New Vlan New Vlan NamePort # TrunkGroupDelete Vlan Menu Vlan NameModify Vlan Menu Virtual LAN NameTrunking Port Management Menu Trunking Port Management menuCreate New Trunking Port New Trunking Group NameName Delete Trunking Port Trunking PortModify Trunking Port Trunking Port NameTroubleshooting Problem SolutionPage Appendix a DES-3216 Technical Specifications Switch SpecificationsPort Specifications 10/100 Auto Negotiation Switch Users’ Guide General EMI 10/100 Auto Negotiation Switch Users’ Guide Performance Access Level IndexUser Name 32, 33