D-Link manual Installing the DES-3216, Installation Options, Desktop/ Shelf Installation

Page 13

10/100 Auto Negotiation Switch User’s Guide

2

Installing the DES-3216

This chapter covers the following:

∙Unpacking the DES-3216

∙Installation options and instructions

∙Powering on the DES-3216

Open the box and carefully unpack the DES-3216. You should have all the items on the following checklist:

∙DES-3216 10/100 Auto Negotiation Switch

∙RS-232 DCE serial cable

∙Two mounting brackets and eight screws

∙Four rubber pads with adhesive backing

∙One six foot (1.82 m) power cord

∙DES-3216/3224 User’s Guide CD ROM

If any items are missing, contact the retailer where you purchased the DES-3216 for assistance.

Be sure to register the DES-3216 immediately. Failure to register the DES-3216 may void the warranty.

Installation Options

There are two options for installing the DES-3216: desktop/ shelf installation or rack installation.

Follow these guidelines for desktop/ shelf installation or rack installation:

∙The surface must support 18 lbs or 8 kg.

∙The power source must be within six feet (1.82 m)

∙Power cord and cables should never be stretched

∙Leave at least two inches around the DES-3216 for ventilation

The following tools and materials may be necessary to install the DES-3216:

∙Screwdriver to install the brackets as needed

∙Wire cutters to cut cable as needed for network connections

∙Crimpers to crimp cable as needed

∙RJ-45 connectors as needed

Desktop/ Shelf Installation

Follow these steps to install the DES-3216 on a desktop or shelf:

1. Place the four rubber pads at the four corners of the DES-3216.

Installing the DES-3216

5

Image 13

Contents DES-3216 10/100 Auto Negotiation Switch User’s Guide Link Limited Warranty Hardware North, Central, and South America FCC Warning Wichtige Sicherheitshinweise Table of Contents Page Page Audience About This GuideOrganization Introduction FeaturesRear Panel Front PanelUpdating Firmware Management MethodsLocal Console Management Telnet ManagementInstallation Options Installing the DES-3216Desktop/ Shelf Installation Rack Installation Power OnCable Specifications Connecting the DES-3216 to the NetworkCable Diagram Ports Connecting the DES-3216 to the DES-5024 and HubsDES-3216 to DES-3216 Connection MDI-X PortLEDs LQNDES-3216 LED Panel Power LEDLED Local Console Management Managing the DES-3216∙ Data bits ∙ Parity None ∙ Stop bits ∙ Flow Control None TelnetLog ∙ Default User Name D-Link ∙ Default Password D-LinkHelp Message Help MessageSpacebar Panel ConventionsSwitch Port 1-8, 9-16 Configuration System ConfigurationSpanning Tree Configuration Console ProgramVlan Port Management Snmp Management ConfigurationTrunking Port Management System Reset System Configuration MenuFactory Reset to Default Config Values System InformationBoot Prom Firmware Version Software UpdateSystem Information Menu Hardware RevisionSoftware Version LAN Default GatewayMAC Address System DescriptionSystem Reset System ResetFactory Reset Factory ResetFactory Reset Confirmation Advantages of Store and Forward System Rate ControlDisadvantages of Store and Forward Disadvantages of Cut-Through Advantages of Cut-ThroughSoftware Update Software Update MenuSoftware Update Transfer File Transfer through Xmodem User Account Change Menu User Account ManagementCreate New User Confirm Password PasswordAccess Level User NameStatus Delete UsersDelete Change Password Change PasswordNew Password Old PasswordSwitch Port Configuration State Switch Port Configuration MenuPhysical Priority Port StateSpanning Tree Configuration Menu Spanning Tree ConfigurationSTA Operation Levels Spanning Tree AlgorithmBridge Priority Forward Delay TimeRoot Cost Hello TimeUser Selective STA parameters Root PortSnmp Management Configuration Menu Snmp Management ConfigurationAccess Right Snmp Manager SettingSnmp Community String Authentication Failure Snmp Trap Manager SettingCold Start Link Change EventPage Vlan Port Management Menu Vlan Port ManagementVlan Port Management menu New Vlan Name Create New VlanPort # TrunkGroupVlan Name Delete Vlan MenuVirtual LAN Name Modify Vlan MenuTrunking Port Management menu Trunking Port Management MenuNew Trunking Group Name Create New Trunking PortName Trunking Port Delete Trunking PortTrunking Port Name Modify Trunking PortProblem Solution TroubleshootingPage Switch Specifications Appendix a DES-3216 Technical SpecificationsPort Specifications 10/100 Auto Negotiation Switch Users’ Guide General EMI 10/100 Auto Negotiation Switch Users’ Guide Performance Index Access LevelUser Name 32, 33