D-Link DES-3216 manual Create New Vlan, New Vlan Name, Port #, TrunkGroup

Page 56

10/100 Auto Negotiation Switch User’s Guide

Create New VLAN

The Create New VLAN menu, displayed in Figure 27, is used to create a new VLAN. The default value is that all ports belong to one VLAN. You can create up to eight separate VLANs. Ports can belong to two VLANs at the same time. Each VLAN is a broadcast domain. If you have created a trunking group, you must include the entire trunk group in the VLAN.

Figure 27: Create New VLAN menu

New VLAN Name

Is the name of the VLAN you are creating. All VLANs must have a unique name.

Port #

Is the number of the port. The numbers on the panel match the ports on the DES-3216. Some ports are combined. For example, ports 1 and 3 are shown as “Port 1/3”. Ports that are grouped together must be part of the same VLAN.

TrunkGroup

This field identifies the trunk group that the port has been assigned to. The field is open if the port has not been assigned to a Trunk Group.

Status

The status field can be either available or selected. Available indicates that the port is available for inclusion in a VLAN. Selected indicates the port has been assigned to a VLAN.

Managing the DES-3216

48

Image 56

Contents DES-3216 10/100 Auto Negotiation Switch User’s Guide Link Limited Warranty Hardware North, Central, and South America FCC Warning Wichtige Sicherheitshinweise Table of Contents Page Page Organization About This GuideAudience Features IntroductionFront Panel Rear PanelManagement Methods Updating FirmwareLocal Console Management Telnet ManagementDesktop/ Shelf Installation Installing the DES-3216Installation Options Power On Rack InstallationConnecting the DES-3216 to the Network Cable SpecificationsCable Diagram Connecting the DES-3216 to the DES-5024 and Hubs PortsDES-3216 to DES-3216 Connection MDI-X PortLQN LEDsPower LED DES-3216 LED PanelLED Managing the DES-3216 Local Console ManagementTelnet ∙ Data bits ∙ Parity None ∙ Stop bits ∙ Flow Control None∙ Default User Name D-Link ∙ Default Password D-Link LogHelp Message Help MessagePanel Conventions SpacebarSystem Configuration Switch Port 1-8, 9-16 ConfigurationSpanning Tree Configuration Console ProgramTrunking Port Management Snmp Management ConfigurationVlan Port Management System Configuration Menu System ResetFactory Reset to Default Config Values System InformationSoftware Update Boot Prom Firmware VersionSystem Information Menu Hardware RevisionLAN Default Gateway Software VersionMAC Address System DescriptionSystem Reset System ResetFactory Reset Factory ResetFactory Reset Confirmation Disadvantages of Store and Forward System Rate ControlAdvantages of Store and Forward Advantages of Cut-Through Disadvantages of Cut-ThroughSoftware Update Menu Software UpdateSoftware Update Transfer File Transfer through Xmodem Create New User User Account ManagementUser Account Change Menu Password Confirm PasswordAccess Level User NameDelete Delete UsersStatus Change Password Change PasswordOld Password New PasswordSwitch Port Configuration Physical Switch Port Configuration MenuState Port State PrioritySpanning Tree Configuration Spanning Tree Configuration MenuSTA Operation Levels Spanning Tree AlgorithmForward Delay Time Bridge PriorityRoot Cost Hello TimeRoot Port User Selective STA parametersSnmp Management Configuration Snmp Management Configuration MenuSnmp Community String Snmp Manager SettingAccess Right Snmp Trap Manager Setting Authentication FailureCold Start Link Change EventPage Vlan Port Management Vlan Port Management MenuVlan Port Management menu Create New Vlan New Vlan NamePort # TrunkGroupDelete Vlan Menu Vlan NameModify Vlan Menu Virtual LAN NameTrunking Port Management Menu Trunking Port Management menuName Create New Trunking PortNew Trunking Group Name Delete Trunking Port Trunking PortModify Trunking Port Trunking Port NameTroubleshooting Problem SolutionPage Port Specifications Appendix a DES-3216 Technical SpecificationsSwitch Specifications 10/100 Auto Negotiation Switch Users’ Guide General EMI 10/100 Auto Negotiation Switch Users’ Guide Performance Access Level IndexUser Name 32, 33