10/100 Fast Ethernet Switch User’s Guide
Setup
The setup of the Switch can be performed using the following steps:
♦The surface must support at least 1.2 Kg for the
♦The power outlet should be within 1.82 meters (6 feet) of the device.
♦Visually inspect the power cord and see that it is fully secured to the AC power connector.
♦Make sure that there is proper heat dissipation from and adequate ventilation around the Switch. Do not place heavy objects on the Switch.
Desktop or Shelf Installation
When installing the Switch on a desktop or shelf, the rubber feet included with the device must be first attached. Attach these cushioning feet on the bottom at each corner of the device. Allow enough ventilation space between the device and the objects around it.
Unpacking and Setup | 7 |