D-Link DES-1004 manual Hub to Switch, DES-1008 Switch connected to a PC or Workstation

10/100 Fast Ethernet Switch User’s Guide

10/100M

Figure 9 DES-1008 Switch connected to a PC or Workstation

The LED indicators for PC connection are dependent on the LAN card capabilities. If LED indicators are not illuminated after making a proper connection, check the PC’s LAN card, the cable, Switch conditions and connections.

The following are LED indicator possibilities for a PC to Switch connection:

1.The 100 M LED indicator comes on for a 100 Mbps and stays off for 10 Mbps.

2.The Link/Act LED indicator illuminates upon hookup.

3.The FDX/Col LED indicator depends upon LAN card capabilities.

Hub to Switch

Ahub (10 or 100Base-T) can be connected to the Switch via a two-pair Category 3, 4, 5 UTP/STP straight cable. The connection is accomplished from the hub’s uplink (MDI-II) port to any of the Switch’s (MDI-X) ports: 1x - 4x for the DES-1004 or 1x - 8x for the DES-1008.

Connecting The Switch 19