PRECAUTIONS/SAFETY Warnings

MATRIX SWITCHERS

Please read this manual carefully before using your MAX Series Matrix Switcher. Keep this manual handy for future reference. These safety instructions are to ensure the long life of your MAX Series Switcher and to prevent fire and shock hazard. Please read them carefully and heed all warnings.

1.1 GENERAL

∙Unauthorized personnel shall not open the unit since there are high-voltage components inside.

∙Qualified Altinex service personnel, or their authorized representatives must perform all service.

1.2 INSTALLATION

∙For best results, place the MAX Series Switcher on a flat, level surface in a dry area, away from dust and moisture. To prevent fire or shock, do not expose this unit to rain or moisture. Do not place the MAX Switcher in direct sunlight, near heaters or heat radiating appliances, or near any liquid. Exposure to direct sunlight, smoke, or steam can harm internal components.

∙Handle your MAX Switcher carefully. Dropping or jarring can damage the internal components. Do not place heavy objects on top of the MAX Switcher.

∙Do not place the MAX Switcher in direct sunlight, near heaters or heat radiating appliances, or near any liquid. Exposure to direct sunlight, smoke or steam can harm internal components. Do not pull power cord or any signal cables that are attached to the MAX. If the MAX is not to be used for an extended period of time, disconnect the power cord from the power outlet.

1.3 RACK-MOUNT INSTALLATION

∙Use only Altinex supplied rack-mount ears for mounting the MAX Switcher into a rack.

∙The maximum operating ambient temperature is 45 degrees Centigrade.

∙When installing the MAX Series Switcher into a rack, distribute individual units evenly, otherwise

hazardous conditions may be created by an uneven weight distribution. Allow 1-U of rack space for every four MAX Switcher modules for air circulation. This will reduce heat build up and will prolong the life of the MAX Switcher.

∙Connect the MAX Series Switcher to a properly rated power outlet.

∙Reliable Earthling of the MAX Series Switcher should be maintained by connecting using the provided 3-prong power cord only. Furthermore, make sure that the rack is properly grounded.

1.4 CLEANING

∙Unplug the MAX Series Switcher’s power cord before cleaning.

∙Clean surfaces with a dry cloth. Never use strong detergents or solvents such as, alcohol or thinner. Do not use a wet cloth or water to clean the unit.

1.5 FCC NOTICE

∙This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference that may cause undesired operation.

∙This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

∙Any changes or modifications to the unit not expressly approved by Altinex, Inc. could void the user’s authority to operate the equipment.