MULTITASKER™
43.[MUT0]
This command turns on the all the outputs without changing the input port selected and without changing any volume settings.
Command Format: [MUT0CnUi]
Cn = Card ID (n = # from 1 to max slots)
Ui = Unit ID (i = # from 0 to 9)
Example:
Send the command [MUT0C4] to enable the outputs for the card in slot 4.
44.[MUT1]
This command turns off all the outputs without changing the input port selected and without changing any output volume settings.
Command Format: [MUT1CnUi]
Cn = Card ID (n = # from 1 to max slots)
Ui = Unit ID (i = # from 0 to 9)
Example:
Send the command [MUT1C4] to mute all the outputs for the card in slot 4.
45.[MATmXy]
The matrix command allows the matrix switcher to be setup for different matrix sizes. The following tables show how the inputs and outputs will be configured when the matrix is changed. The input and output layouts are as viewed from the front of the card.
Example:
In the 8x4 configuration, when Input 1 is connected to Output 4, the entire channel, 1a and 1b, will be switched to outputs 4a and 4b respectively.
Command Format: [MATmXyCnUi]
m = number of inputs (m = 16, 8 or 4)
y = number of outputs (y = 8, 4 or 2)
Cn = Card ID (n = slot # from 1 to max slots)
Ui = Unit ID (i = # from 0 to 9)
16 x 8
| INPUTS | OUTPUTS | |
9 |
| 1 | 1 |
10 |
| 2 | 2 |
11 |
| 3 | 3 |
12 |
| 4 | 4 |
13 |
| 5 | 5 |
14 |
| 6 | 6 |
15 |
| 7 | 7 |
16 |
| 8 | 8 |
|
|
|
|
|
| 8 x 4 |
|
| INPUTS | OUTPUTS | |
5 a |
| 1 a | 1 a |
5 b |
| 1 b | 1 b |
6 a |
| 2 a | 2 a |
6 b |
| 2 b | 2 b |
7 a |
| 3 a | 3 a |
7 b |
| 3 b | 3 b |
8 a |
| 4 a | 4 a |
8 b |
| 4 b | 4 b |
|
|
|
|
|
| 4 x 2 |
|
| INPUTS | OUTPUTS | |
3 a |
| 1 a | 1 a |
3 b |
| 1 b | 1 b |
3 c |
| 1 c | 1 c |
3 d |
| 1 d | 1 d |
4 a |
| 2 a | 2 a |
4 b |
| 2 b | 2 b |
4 c |
| 2 c | 2 c |
4 d |
| 2 d | 2 d |
46.[HELP]
This command displays information available for the MultiTasker™ interface commands.
Command Format: [HELPCnUi]
Cn = Card ID (n = # from 1 to max slots)
Ui = Unit ID (i = # from 0 to 9)
22 |