Operation
Start Up
Primary/Secondary Access Panel
To remove the access panel covering the Primary/Secondary Select button remove the screw that secures the panel to the enclosure. Slide the access panel slightly to the right and then pull the access panel toward you.
Operation
Indicators and Controls
Local Power Remote Power
Reset/Test
Local 63V Fault
Primary/
Secondary
Select
Primary
Secondary
220V Normal
Circuit Breaker
Local Power |
Remote Power |
Reset/Test |
Local 63V Fault |
Primary |
Secondary |
220V Normal |
Circuit Breaker: The circuit breaker protects the 220 V input from overload conditions.
Local Power: Green LED indicates that the Automatic Disconnect Switch is providing power to the cable system.
Remote Power: Green LED indicates the cable system is receiving power from a source other than the Automatic Disconnect Switch.
Broadband Automatic Disconnect Switch User Manual | 11 |