American Power Conversion Automatic Disconnect Switch user manual Installation, Unpack

Installation

Electrical Specifications

	Utility Power	Cable
Input
Connection	Three Position	Cable Adapter (5/8-24)
	Terminal Block	Terminal Block to Coax Center Conductor
Nominal Voltage	220 V	63 V
Allowable Input range	165-270 V	40-75 V
Maximum Current	15 A	18 A
Input Current Limiting	10 A	N/A
Output
Connection	Three Position	Cable Adapter (5/8-24)
	Terminal Block	Terminal Block to Coax Center Conductor I
Allowable Output range		40-75 V
Initial Connection Delay		Primary - None
		Secondary - 5.5 seconds
Time to connect attached FRP	N/A	350 mS maximum
to cable system after output
failure

Physical Specifications

Characteristic	Specification
Height/Width/Depth	15” x 7” x 8” (38.1 x 17.8 x 20.3 cm)
Weight	14 lbs (6.4 kg)

Installation

Unpack

Read the Safety Guide before installing this unit. The User Manual and Safety Guide are accessible on the APC Web site, www.apc.com.

Inspect the unit upon receipt. Notify the carrier and dealer if there is damage. The packaging is recyclable; save it for reuse or dispose of it properly. Check the package contents:

4 Broadband Automatic Disconnect Switch User Manual