Allied Telesis AT-GS950/8 manual User Interface Configuration

Page 26

How to Start an AT-GS950/8 WEB Management Session

User Interface Configuration

This procedure explains how to enable and disable the user interfaces on the switch. With this procedure you can enable or disable the AT-GS950/8 SNMP Agent. For more information about SNMP, see the AT-GS950 Web User Guide.

The Web Server Status is displayed as Enabled for your information only. The Web Server cannot be disabled.

SNMP Interface To enable or disable the AT-GS950/8 SNMP interface, perform the following procedure:

1.From the main menu on the left side of the page, click the System folder.

The System folder expands.

2.From the System folder, select User Interface.

The User Interface Page is displayed. See Figure 12.

Figure 12. User Interface Page

3.Choose Enable or Disable from the pull down list for the SNMP Agent parameter.

Enabled - When you enable this parameter, the SNMP agent is active. You can manage the AT-GS950/8 switch with Network Management Software and the switch’s private MIB.

Disabled - When you enable this parameter, the SNMP agent is inactive.

Note

For more information about SNMP, see the AT-GS950 Web User

Guide.

4.Click Apply located under the Web Server Status Enable/Disable field.

26

Image 26

Contents How to Start a WEB Management Session Copyright 2011 Allied Telesis, Inc How to Start an AT-GS950/8 WEB Management Session Entering a Switch’s IP Address in the URL Field How to Start an AT-GS950/8 WEB Management Session  Snmp How to Start an AT-GS950/8 WEB Management Session Web Browser Tools Configuration of IP Address, Subnet Mask and Gateway Address How to Start an AT-GS950/8 WEB Management Session IP Access List Configuration Create an IP Access ListYou can add up to 10 IP address to the IP Access List table Delete an IP Address List Entry Manually Setting System Time System TimeHow to Start an AT-GS950/8 WEB Management Session Setting Daylight Savings Parameters Daylight Savings Time Status field, select EnabledDhcp and ATI Web Discovery Tool Dhcp Client Configuration How to Start an AT-GS950/8 WEB Management Session Dhcp Auto Configuration System Management Information How to Start an AT-GS950/8 WEB Management Session User Name and Password Configuration Add New User Name PasswordModify User Name Password Delete User Name and Password User Interface Configuration User Interface Timeout System Information Display How to Start an AT-GS950/8 WEB Management Session Switch Reboot Password Protection Factory ResetHow to Start an AT-GS950/8 WEB Management Session Configure Factory Default Values How to Start an AT-GS950/8 WEB Management Session Disabling Factory Default Reset Feature How to Start an AT-GS950/8 WEB Management Session Enabling Factory Default Reset Pinging a Remote System How to Start an AT-GS950/8 WEB Management Session SSL Settings How to Start an AT-GS950/8 WEB Management Session System Log Configuration System Log ConfigurationHow to Start an AT-GS950/8 WEB Management Session Factory Default Quitting a Web Browser Management Session

Related manuals

Manual 76 pages 23.63 Kb