User Interface Timeout
How to Start an AT-GS950/8 WEB Management Session
5.From the main menu on the left side of the page, select Save Configuration to Flash to permanently save your changes.
To set the Web Idle Timeout, perform the following procedure:
1.From the main menu on the left side of the page, click the System folder.
The System folder expands.
2.From the System folder, select User Interface.
The User Interface Page is displayed. See Figure 12 on page 26.
3.Refer to the bottom portion of the web page. Enter the Web Idle Timeout parameter. The range is from 3 to 60 minutes.
4.From the main menu on the left side of the page, select Save Configuration to Flash to permanently save your changes.
27