MSkip Mode
This feature allows you to switch between computers in order to monitor them manually. You can dwell on a particular port for as long or as little as you like - as opposed to Auto Scanning, which automatically switches after a fixed interval. To invoke Skip Mode, key in the following Hotkey combination:
1.Invoke Hotkey Mode (see p. 15)
2.Key in [Arrow]
Where [Arrow] refers to the left or right Arrow key. After you press [Arrow], you automatically exit Hotkey Mode, and enter Previous/Next Mode where you can switch ports as follows:
←Skips from the current port to the first accessible port previous to it. (See Scan Mode, p. 26, for information regarding accessible ports.)
→ Skips from the current port to the next accessible port.
3.To exit Skip Mode, press [Esc] or [Spacebar]
Note: While Skip Mode is in effect, ordinary keyboard and mouse functions are suspended - only Skip Mode compliant keystrokes can be input. You must exit Skip Mode in order to regain normal control of the console.
19 |