Hotkey Beeper Control
The Beeper (see Activate Beeper, p. 28) can be Hotkey toggled On and Off. To toggle the Beeper, key in the following Hotkey combination:
1.Invoke Hotkey Mode (see p. 15)
2.Key in [B]
After you press [B], the Beeper toggles On or Off. The Command Line displays Beeper On or Beeper Off for one second; then the message disappears and you automatically exit Hotkey Mode.
Hotkey Summary Table
[Num Lock] + [*] | [Port ID] [Enter] | Switches access to the computer that | |
or |
| corresponds to that Port ID. | |
[Num Lock] + |
|
| |
[T] [n] [Enter] | Sets the Auto Scan interval to n | ||
| |||
|
| seconds - where n is a number from 1 - | |
|
| 255. | |
|
|
| |
| [A] | Invokes Auto Scan Mode. | |
|
| When Auto Scan Mode is in effect, [P] | |
|
| or Left Click pauses Auto Scanning. | |
|
| When Auto Scanning is paused, | |
|
| pressing Any Key or another Left Click | |
|
| resumes Auto Scanning. | |
|
|
| |
| [←] | Invokes Skip Mode andSkips from the | |
|
| current port to the first accessible port | |
|
| previous to it. | |
|
|
| |
| [→] | Invokes Skip Mode andSkips from the | |
|
| current port to the next accessible port. | |
|
|
| |
| [B] | Toggles the Beeper On or Off. |
20 |