
(F4 ADM: continued)
Setting | Function |
SET QUICK | This function lets the Administrator select which Ports to include as |
VIEW PORTS | Quick View ports. |
| Note: Only the Ports currently chosen for the LIST view on the |
| main OSD screen (see p. 24), show up here. |
| M To select/deselect a port as a Quick View Port, use the |
| Navigation Keys to move the highlight bar to it, then |
| Press [Enter]. |
| M When a port has been selected as a Quick View Port, an |
| arrowhead displays in the QV column of the LIST on the Main |
| Screen to indicate so. When a port is deselected, the |
| arrowhead disappears. |
| M If one of the Quick View options is chosen for the LIST view |
| (see p. 24), only Ports that have been selected here will show |
| up on the LIST display on the main OSD screen. |
| M If one of the Quick View options is chosen for Auto Scanning |
| (see p. 26), only Ports that have been selected here will be Auto |
| Scanned. |
| The default is for no ports to be selected. |
|
|
SET | This function allows the Administrator to define User access to |
ACCESSIBLE | the computers on the installation on a |
PORTS | each User, select the target Port; then press the [Spacebar] to |
| cycle through the choices: F (Full access), V (View Only) or |
| blank. Repeat until all access rights have been set, then press |
| [Esc]. The default is F for all users on all Ports. |
| Note: A blank setting means that no access rights are granted. |
| The Port will not show up on the User’s LIST on the Main Screen. |
|
|
29 |