(F3 SET: continued)
Setting | Function |
PORT ID | Selects how the Port ID is displayed: the Port Number alone |
DISPLAY | (PORT NUMBER); the Port Name alone (PORT NAME); or the Port |
MODE | Number plus the Port Name (PORT NUMBER + PORT NAME). The |
| default is PORT NUMBER + PORT NAME. |
|
|
SCAN | Determines how long the focus dwells on each port as it cycles |
DURATION | through the selected ports in Auto Scan Mode (see p. 30). Key in |
| a value from 1 - 255 seconds, then press [Enter]. Default is 5 |
| seconds; a setting of 0 disables the Scan function. |
|
|
SCAN/SKIP | Selects which computers will be accessed under Auto Scan |
MODE | Mode (see p. 30). Choices are: ALL - All the Ports which have |
| been set Accessible (see p. 29); POWERED ON - Only those |
| Ports which have been set Accessible and are Powered On; |
| QUICK VIEW - Only those Ports which have been set Accessible |
| and have been selected as Quick View Ports (see p. 29); QUICK |
| VIEW + POWERED ON - Only those Ports which have been set |
| Accessible and have been selected as Quick View Ports and are |
| Powered On. The default is ALL. |
| Note: The Quick View choices only show up on the |
| Administrator’s screen, since only he has Quick View setting |
| rights (see p. 29, for details). |
|
|
SCREEN | If there is no input from the console for the amount of time set |
BLANKER | with this function, the screen is blanked. Key in a value from 1 - |
| 30 minutes, then press [Enter]. A setting of 0 disables this |
| function. The default is 0. |
|
|
26 |