Note: The User ID (PIN number) is a 5 digit number. If you input less than 5 digits the terminal pads the User ID with 0’s in front of the User ID, i.e., if you enter 11 the User ID 00011 is displayed on the terminal.
3)Input the User ID (range is 1 to 65534), press [OK]. The following appears:
New Enroll
Place Finger…
ESC/Exit
Note:
The dash number (-0) indicates the first fingerprint.
4)You will be prompted to take (3) samples of your fingerprint. If the test is successful three times in a row, the following appears:
New Enroll
ESC | OK (Save) |
5)Press [OK], the previous message continues to be displayed while the template is created. If your identity cannot be verified, you are prompted to try again and you must restart the verification procedure (Refer to Step 2).
-18 -