Alm AttLog: An alarm will sound when the logs are full. The set number is the remaining log capacity before the logs are full, set from
ReCheck Min: Set the number of minutes before another punch is accepted by the terminal. If a punch occurs within the ReCheck Minutes, the punch will not be logged. This reduces duplicate (accidental) punches.
Auto Test
Select “Auto Test”, press [OK], the following appears:
Auto Test ▼ ►Run All Test
FLASH Test LCD Test
Voice Test FP Test Key Test RTC Test
These options allow the testing of each portion of the terminal in order to pinpoint failures.
WARNING: Do not disconnect or interrupt power while performing any of the tests (loss of power during testing may damage the hardware.
- 48 -