Advantech 4718 user manual Device Manager Screen

	Figure 2.2: Device Manager Screen
Note:	If your module is properly installed, you should
	see the device name of your module listed on the
	Device Manager tab. If you see your device name
	listed, but marked with an exclamation sign “!”
	(Fig. 2-4), it means your module has not been
	correctly installed. In this case, remove the mod-
	ule from Device Manager by selecting its device
	name and press the Remove button. Then go
	through the driver installation process again.

You can check the Device Properties to see if your device is running under "Full Speed" mode (USB 1.1) or "High Speed" mode (USB 2.0). See figure 2.3 on the next page.

13 Chapter2