SuperSmart User’s Guide
To summarize,
1.Access configuration functions by using a "long press". LEDs light up to indicate the current configuration function. (Example: One of the Segment LEDs will BLINK to indicate that the system is in Segment Setting mode.)
2.Compare the LED display you see on the hub’s front panel with the appropriate LED display in the succeeding pages. Each LED display corresponds to a selection within a function. (Example: If the system is in Segment Setting function, see the LED display table under Segment Setting in this chapter).
3.If you want to implement the selection displayed for your hub, proceed to step 4. Otherwise, move to the next selection using a "short press". Repeat a "short press" until you find the selection you want.
4.To implement your selection and continue on to the next function, use a "long press".
Setup and Configuration |