1. Click the Test button in the Port Mapping utility.
Figure 3-14 Test window
Signal Test
•RTS è CTS: Check the RTS and CTS signals between two ports.
•DTR è RI: Check the DTR and RI signal between two ports.
•DTR è DSR: Check the DTR and DSR signal between two ports.
•DTR è DCD: Check the DTR and DCD signal between two ports.
Communication Parameters Test
•Baud rate: From 50 bps to 230 Kbps
•Data bit: 5,6, 7, 8
•Stop bit: 1, 1.5, 2
•Parity: odd, even, none, space, mark