Accton Technology 100BASE-TX, 10BASE-T manual Rear Panel, Ethernet Ports, Power Socket

Page 24

SwitcHub-2s User’s Guide

Rear Panel

The unit’s rear panel includes two logical Ethernet ports and a full-range power socket. Although 10BASE-T and 100BASE-TX connections are automatically sensed by the SwitcHub, you must use the Configure button to set the data transfer mode to full-duplex or half-duplex operation, as described under Setting the Communication Mode in this chapter. The following figure shows the rear panel.

Figure 2.3 The SwitcHub-2s Rear Panel

Ethernet Ports

The SwitcHub has 2 logical RJ-45 Ethernet ports – one MDI-X port for connecting to a workstation or server and one MDI port for connecting to another network interconnection device, such as a hub or switch. When using Fast Ethernet, these ports can also be connected to devices such as a high-speed server or Ethernet backbone. Use straight-through twisted-pair cable to connect to any of the switching ports.

Note: Either the Port 1 or Port 2 MDI port can be used as a daisy-chain port to connect the switching hub to other compatible hubs using straight-through twisted-pair cable .

Power Socket

The power socket accepts AC power from 100 to 240V at 50 to 60Hz. The unit is equipped with a universal full-range power source.

2-10

Hardware Description

Page 23 Page 25
Image 24
Page 23 Page 25
Contents SwitcHub-2s SwitcHub-2s QWHUQDWLRQDO+HDGTXDUWHUV About this Guide Package Contents Quick Installation Contents Appendix a Troubleshooting Appendix C SpecificationsAppendix B Port and Cable Assignments Appendix D Regulatory Standards ComplianceAppendix E Product Support Services Glossary Index List of FiguresList of Tables Switching Technology IntroductionAccton’s Smart Extender The Fast SwitcHub-2s SwitcHub-2s User’s Guide Features of the Fast SwitcHub-2s SwitcHub-2s User’s Guide Hardware Description Front PanelConfigure Button Color Green Label Power Function Power indicator SmartWatch LED PanelChapter for instructions on how to select the display mode SwitcHub-2s User’s Guide Setting the Communication Mode Full/Half Duplex Color Green Active LED Port Diagnostic Test Transmit TX Indicates outgoing traffic traversing the port Power Socket Rear PanelEthernet Ports Setup and Configuration Pre-Installation RequirementsConnecting the Hub System Server/Workstation ConnectionDaisy-Chain Connection Providing Power to the SwitcHub Diagnostic TestsSetting the Display Mode Selections Available Diag on Verifying Port Status Verifying System OperationSwitcHub-2s User’s Guide Appendix a Troubleshooting Diagnosing Hub IndicatorsPage Hub Integrity Appendix B RJ-45 PortAppendix C Specifications Product SpecificationsAppendix D Regulatory EMI WarningFCC Class B Certification Regulatory Standards Compliance EN55022 Declaration of Conformance Safety Compliance Operating VoltageSwitcHub-2s User’s Guide Sicherheitshinweise Appendix E Product Support Services Problem ReportHardware Repair Service Product RegistrationSoftware Update and Upgrade Service Bulletin Board Service BBSInteractive Fast Fax U.S.A. office Technical Support International Headquarters USA HeadquartersLimited Warranty Customer RemediesReturn Process North and South AmericaAccton Distributors Ordering InformationGlossary 10BASE-TLED Unshielded Twisted-Pair UTP Index Index EH3001-TX E0496-R03

10BASE-T, 100BASE-TX specifications

Accton Technology is a prominent player in the networking industry, particularly known for its contributions to Ethernet technology. Among its notable products are the 100BASE-TX and 10BASE-T Ethernet standards, which have been instrumental in shaping local area networking (LAN) infrastructures.

The 100BASE-TX standard, also known as Fast Ethernet, provides a data transfer rate of up to 100 Mbps and operates over twisted-pair cabling, specifically Category 5 cables. This technology was designed to enhance the speed of traditional Ethernet (10BASE-T), which operates at 10 Mbps. The 100BASE-TX standard employs a signaling method called four-pair twisted copper cabling, which optimizes signal integrity and reduces electromagnetic interference. One of its core features is the ability to leverage existing cabling infrastructure while providing significant speed improvements, making it a cost-effective solution for upgrading network performance.

On the other hand, 10BASE-T represents the original Ethernet technology, defining a standard for 10 Mbps data transmission. It utilizes twisted-pair wiring and is capable of operating over distances of up to 100 meters. This protocol laid the groundwork for networking, allowing the widespread adoption of Ethernet in office environments and beyond. 10BASE-T employs baseband signaling, which means that the cabling is dedicated solely to Ethernet traffic, minimizing interference from other signals.

Key characteristics of both 100BASE-TX and 10BASE-T include their ability to support full-duplex communication, which allows data to be transmitted and received simultaneously, thereby doubling the potential throughput. This feature is particularly beneficial for applications that require high data rates and low latency, such as voice over IP (VoIP) and video conferencing.

Moreover, these Ethernet standards are built around plug-and-play capabilities, making network setups simpler and more accessible, even for organizations without extensive IT resources. Accton Technology supports these protocols with a range of switches and network interface cards that enable seamless integration into existing networks.

In conclusion, Accton Technology's 100BASE-TX and 10BASE-T standards are vital components in the evolution of Ethernet networking. With their impressive data transfer rates, compatibility with existing cabling, and support for full-duplex communication, they continue to be relevant in modern networking solutions, providing businesses with reliable and efficient means for data transmission.
Top Page Image Contents