Adder Technology Switch manual Power supply connection, Power switching connections

Page 10

Power supply connection

The SmartView World is supplied with a single power supply and an appropriate country-specific IEC power lead. The SmartView World does not have an on/off switch so operation begins as soon as the power supply is connected.

Note: When computers are first powered on they communicate with any attached keyboards and mice in order to setup parameters required by their operating system. It is necessary for the SmartView World to be attached and powered on during this sequence so that it can give the required responses and keep track of all modes and settings requested by each of the connected computers.

To connect the power supply

1Connect the low voltage output connector from the power supply unit to the SmartView World power socket in the lower left corner of the rear panel.

2Connect the IEC connector of the supplied country-specific power lead to the socket of the power supply.

3 Connect the power lead to a nearby main supply socket.

Power switching connections

A key feature of the SmartView World is its ability to remotely control the power of the computers attached to it. The actual power switching process requires the use of optional switch boxes available from a number of suppliers (Adder part number: EPS-S8), however, the SmartView World offers the control port for these switches and the necessary operational integration within its menu system.

The control connector of the first power switch is connected, via serial cable, to the rear panel of the SmartView World. Any additional power switches are then connected via a ‘daisy-chain’ arrangement to the first power switch. Each power switch box is then given a unique address and access to each power port (8 ports on each power switch box) is gained using a combination of the switch box address and the port number.

Each power port can then be connected to the power inputs of each computer and each power switch box then connected to a mains power supply.

‘Daisy-chain’

 

control

Power

connections

switch

 

 

boxes

Box 1

 

Box 2

Power to computer

Box 2, port 6 - address: 26

Box 3

Box 4

IMPORTANT: Power switching devices have a maximum current rating. It is essential to ensure that the total current drawn by the equipment connected to the power switching device does not exceed the current rating of the power switching device. You must also ensure that the current drawn from any mains socket does not exceed the current rating of the mains socket.

Setting up, configuring and using power switching requires three main steps:

•Connect and address the switch boxes

•Configure the power strings

•Operate remote power switching

   



9

Page 9 Page 11
Image 10
Page 9 Page 11
Contents SmartView World Contents Operation Welcome IntroductionWhat’s in the box What you may additionally needConnections MountingTo attach the rack-mount brackets Computer port connections Local user port connectionsRemote IP user port connections To initially connect and configure the IP port stage 1Extended user port connections To connect an extended user portEthernet connection IP auto configuration none/dhcp/bootp dhcp select ‘none’To make the final IP port connection stage 2 Serial port connectionPower switching connections Power supply connectionTo connect the power supply To connect and address the switch boxes Cascade connections How cascade connections operate To connect switches in a cascade arrangement Addressing computers in a cascadeTips for successful cascading Using cascaded computersTesting specific links to cascaded computers InstructionsMultiple video head connections Keyboard, video and mouse KVM switching Overall initial configurationA hurry? KVM configuration menus To access the KVM configuration menuAccess to all computers Press Access to no computers Press To enable KVM securityTo set an Admin password To change the KVM hotkeysAutoscanning Tips when creating/editing computer namesSelect the autoscan mode List, Active or All To create/edit computer namesSaving and restoring KVM configuration settings Preparations for KVM configuration save/loadTo restore KVM configuration settings What to do if the Admin password has been forgottenTo edit the KVM configuration settings Hints for editingHot plugging and mouse restoration Which restore setting do I use?To restore mouse operation when hot plugging Recognising an IntelliMouse-style mouseTo perform a power-off reset for a selected user port Resetting user port keyboards and micePower switching configuration To configure the power-control serial portStructure of power strings Editing power stringsCreating power port groups To change between the Ascii and HEX edit areasSuper IP configuration panelsTo access the IP configuration panels SmartviewOrganising users and groups Using the User/Group Management panelTo change the superuser’s password To add a userTo add a group To modify, copy or delete a userTo modify, copy or delete a group Using the User/Group Permissions panel To edit permissions for a user or groupSelecting appropriate security settings To select security settingsDetermining computer ports display and selection To edit computer names and switching codesTo set the number of KVM ports To select a computer Using Remote Console to synchronise operationSelecting computers IP section To synchronise screen and mouse operationTo make use of the activity logging features Logging access activityTo disable mouse acceleration Disabling mouse accelerationFront panel controls Powering onKVM switching items IP remote-connection itemsTo select a computer using the on-screen menu Using the KVM switching sectionTo select a computer using the front panel controls Selecting a computer local and extended usersTo select a computer using mouse buttons To select a computer using hotkeysStandard hotkeys To log in to the SmartView World KVM section To select a computer using mouse buttons Advanced methodLogging in and out KVM section To log out from the SmartView World KVM sectionSelecting cascaded computers Using the dual access portsTo change banner colours or disable the banner Reminder bannerTo switch a computer on or off Using remote power switchingTo use the Routing status feature Routing statusLogging in and out IP section Using the remote IP sectionYour Login name Your Password To log in to the SmartView World IP sectionSelecting a computer remote IP users Using remote chatTo use remote chat Poor video quality with smearing, fuzziness or ripple TroubleshootingGetting assistance US +1 888 275Setup Options Appendix 1 KVM configuration menu itemsAppendices Global Preferences To access Global PreferencesMouse Switching Exclusive UseScreen Saver Autoscan ModeUser Timeout To define the autoscan listUser Preferences Functions Appendix 2 IP configuration panels Keyboard/Mouse SettingsTransmission Encoding Remote Console SettingsUser select box Various Remote Console OptionsMouse hotkey Remote Console TypeRemote Console Button Keys KVM Configuration KVM SettingsSwitch Active Port KVM Port SettingsVideo Quality and Speed Video SettingsNoise filter Custom Video ModesUser/Group Management User/Group Permissions User and group permissionsNetwork Settings Serial Port Settings Ldap SettingsTelnet Settings Security SettingsSSL Settings IP Access ControlTraps Snmp SettingsAgent Trap destinationsIpmi Settings Remote Console Video Settings Remote Console Options Update Firmware MaintenanceMaintenance features Reset SmartView World IP sectionTo perform a flash upgrade on the SmartView World Appendix 3 Firmware upgrade KVM sectionItems needed to perform the upgrade To check your current firmware versionIssues to consider when performing flash upgrades RS232 serial mouse to PS/2 converter cable Appendix 4 Cable and connector specificationsRS232 serial flash upgrade cable RS232 serial synchronisation cableSmartView World to power switch cable SmartView World setup cablePower switch to power switch daisy chain cable Warranty Safety informationOther products in the SmartView range European EMC directive 89/336/EEC Radio Frequency EnergyFCC Compliance Statement United States United States of America Index

Switch specifications

Adder Technology is a leading provider of high-performance video and audio equipment, specializing in KVM (Keyboard, Video, Mouse) solutions. Among its array of advanced products, the Adder Technology Switch stands out for its unique features and cutting-edge technologies that cater to the needs of various industries, especially for those engaged in broadcast, media, and IT applications.

One of the main features of the Adder Technology Switch is its ability to enable seamless switching between multiple computers using a single keyboard and monitor. This functionality not only enhances productivity but also simplifies workspace management by reducing the clutter caused by multiple peripherals. Users can easily toggle between different sources, allowing for greater efficiency when handling multiple tasks.

The Adder Technology Switch employs high-performance video technologies, ensuring that the image quality remains pristine, even at high resolutions. It supports various video standards, including 4K and HD, providing crystal-clear visuals that are vital for applications requiring critical monitoring, such as video editing and live broadcasting. The low latency performance of this switch guarantees real-time interaction, an essential feature when working in fast-paced environments.

In terms of connectivity, the Adder Technology Switch offers a versatile range of input and output options. It supports various interfaces, including HDMI, DisplayPort, and USB, which means it is compatible with a wide variety of devices and setups. This flexibility allows users to integrate the switch into existing workflows with ease.

Another critical characteristic of the Adder Technology Switch is its robust build quality. Designed for heavy-duty use, it is engineered to withstand the demanding conditions often found in professional environments. Additionally, the switch often features advanced remote access capabilities, allowing users to operate and control their systems from different locations, further enhancing flexibility.

Security is also a focal point with the Adder Technology Switch. It incorporates the latest security protocols to safeguard sensitive data while ensuring that users can maintain productivity without compromising information integrity.

In summary, the Adder Technology Switch combines advanced switching technology with high-quality video performance and robust connectivity options. Its features cater specifically to professional users who require reliable, efficient, and secure solutions for managing multiple computer systems in various demanding environments. Whether in a broadcast studio, control room, or a corporate IT setting, the Adder Technology Switch stands as a pivotal tool for enhancing operational efficiency and performance.
Top Page Image Contents