Adder Technology TS4 manual Welcome, Introduction

Page 3

Welcome

Introduction

The Adder TS4 is a robust keyboard and mouse switch created specifically for trading floors and control rooms, where information must be controlled across numerous systems and screens. The TS4 allows a single keyboard and mouse to fulfil the function that previously required four separate sets. This provides immediate savings in both desk space and also the time required to access information spread across up to four systems and screens.

Switching between the systems connected to the Adder TS4 can be achieved in five different ways:

The Adder TS4 unit SELECT button

The optional RC4 Remote control selector

Keyboard hotkey combinations

Mouse button combinations

Automatic switching using the Synchrony utility (see below)

Automatic switching between systems

The video displays are connected directly to their respective systems as usual. The keyboard and mouse ports of each system, however, are connected to the TS4 unit.

The keyboard and mouse are electronically linked through to the currently selected system.

  

When used with Synchrony software, the Adder TS4 allows automatic switching between the connected systems and screens. The switching between the systems is determined primarily by the position of the mouse cursor. As the cursor exceeds the periphery of one screen, control is seamlessly switched to the next screen/system.

The display clearly shows which system

TS4 unit

This operation requires all of the systems to run the Synchrony utility and one of them to be designated as the ‘primary’. Additionally, a serial link is required between the primary system and the Adder TS4.

PC1

(PRIMARY)

Serial (RS232) link between switch and primary system

PC2

TS4 unit

is currently connected to the keyboard and mouse.

RC4 Remote control allows the main unit to be neatly concealed amongst the cabling.

Single keyboard and mouse are common to all of the systems and are electronically connected to the required one using any of four switching methods. Switching can be initiated from either the keyboard or mouse in addition to the TS4 unit or optional remote control.

 

See page 3 for

further details: How does Synchrony work?

SYSTEM

www.adder.comSELECT



Image 3
Contents Adder TS4 Contents Introduction WelcomeHow does Synchrony work? Synchrony configuration tipsAdditional and optional items Standard itemsInstallation LocationsMounting To connect a system USB-style connections Making connectionsSystem connections To connect a system PS/2-style connectionsRemote control connections Optional power supply connectionsKeyboard and mouse connections To connect the Synchrony serial link cable Synchrony connectionsConfiguration switch settings To restore mouse operation when hot plugging Recognising an IntelliMouse-style mouseRecognising an IntelliMouse driver Operation System readoutSelecting systems Configuration options Setting or changing a passwordChanging hotkeys Mouse button switching modes Resetting and restoring default settingsAll channel/active channel cycling To upgrade the Adder TS4 UpgradingTo discover the current firmware version Getting assistance TroubleshootingUpgrade cable pin out Further informationWarranty Safety informationCanadian Department of Communications RFI statement Emissions and ImmunityEuropean EMC directive 89/336/EEC FCC Compliance Statement United StatesUnited States of America