Adder Technology TS4 manual Safety information, Warranty

Page 17

Safety information

For use in dry, oil free indoor environments only.

Not suitable for use in hazardous or explosive environments or next to highly flammable materials.

The optional power adapter is only required when the link cables used exceed 2 metres in length. Otherwise the Adder TS4 can derive its power from any of the host systems via the keyboard connections.

Warning – the optional power adapter contains live parts.

No user serviceable parts are contained within the optional power adapter - do not dismantle.

Do not use the optional power adapter if the power adapter case becomes damaged, cracked or broken or if you suspect that it is not operating properly.

Replace the optional power adapter with a manufacturer approved type only.

If you use a power extension cable, make sure the total ampere rating of the devices plugged into the extension cable do not exceed the cable’s ampere rating. Also, make sure that the total ampere rating of all the devices plugged into the wall outlet does not exceed the wall outlet’s ampere rating.

Do not attempt to service the Adder TS4 unit or its remote control yourself.

The optional power adapter can get warm in operation – do not situate it in an enclosed space without any ventilation.

The Adder TS4 unit does not provide ground isolation and should not be used for any applications that require ground isolation or galvanic isolation.

When using the optional power adapter, use only with a grounded outlet. When using a backup power supply (UPS), power the computers, the monitors and the Adder TS4 from the same supply.

Warranty

Adder Technology Ltd warrants that this product shall be free from defects in workmanship and materials for a period of two years from the date of original purchase. If the product should fail to operate correctly in normal use during the warranty period, Adder will replace or repair it free of charge. No liability can be accepted for damage due to misuse or circumstances outside Adder’s control. Also Adder will not be responsible for any loss, damage or injury arising directly or indirectly from the use of this product. Adder’s total liability under the terms of this warranty shall in all circumstances be limited to the replacement value of this product. If any difficulty is experienced in the installation or use of this product that you are unable to resolve, please contact your supplier.

    

16

Image 17
Contents Adder TS4 Contents Introduction WelcomeHow does Synchrony work? Synchrony configuration tipsAdditional and optional items Standard itemsMounting InstallationLocations System connections Making connectionsTo connect a system PS/2-style connections To connect a system USB-style connectionsKeyboard and mouse connections Remote control connectionsOptional power supply connections To connect the Synchrony serial link cable Synchrony connectionsConfiguration switch settings Recognising an IntelliMouse driver To restore mouse operation when hot pluggingRecognising an IntelliMouse-style mouse Selecting systems OperationSystem readout Changing hotkeys Configuration optionsSetting or changing a password All channel/active channel cycling Mouse button switching modesResetting and restoring default settings To discover the current firmware version To upgrade the Adder TS4Upgrading Upgrade cable pin out TroubleshootingFurther information Getting assistanceWarranty Safety informationEuropean EMC directive 89/336/EEC Emissions and ImmunityFCC Compliance Statement United States Canadian Department of Communications RFI statementUnited States of America