Windows NT Drivers Setup
Procedure
Step 1
1.Install Windows NT as you normally would for a VGA display.
2.First click the Start button, choose Settings and click on Control Panel.
3.Choose the Display icon and click on the icon.
4.In the Display Properties window, click on the Settings tab.
5.Click on Change Display Type. In the Change Display Type window, click on the Change button under Adapter Type. This will bring up the Select Device window.
Step 2
1.In the Select Device window, click on the Other button. Enter source directory where the Windows NT driver files are located.
2.Press <ENTER> and the name of the Chips and Technologies Video Accelerator driver will appear at the end of Models list box. Scroll to the end of the list box and double click on the driver.
3.Once the installation is complete, the system must be shut down and restarted.
Step 3
1.Upon restarting your computer, select the desired display settings from the Display property dialog box.
2.Click on Test to test the newly selected graphics mode. A color test screen should appear, followed by the Testing Mode window.
3.Click on Yes to continue. The Display Settings Change window will appear.
4.Click on Restart Now for the new settings to take effect.
58