Parker Hannifin vm24 manual To Remove I/O Boards, SIM Socket Clip Top View

To Remove I/O Boards

1.Gently depress or push the metal socket clamps (see Fig. 11 below) to release the I/O board from the socket.

2.Tilt the I/O board toward the back of the socket and lift it out gently. Never force the I/O board out of the socket without releasing the clamps. Failure to release the clamps may break the socket, causing damage which is not covered by warranty.

Depress - or - Push

Fig. 11: SIM Socket Clip - Top View

Caution

Remove power to the VM24 before

removing or inserting boards.

Troubleshooting 25