Notch
P/N:
Fig. 9: I/O Board and Socket
To Insert I/O Boards
1.Insert the I/O board into the socket, as shown in Fig. 9 above, and in Fig. 10 below. Start the I/O board at an angle of approximately 30°.
2.Firmly press the board into the socket and rotate it forward until it snaps underneath the metal clips.
3.Make sure both clips have snapped into place to secure the I/O board.
1 | 2 | 3 |
30
Fig. 10: I/O Board Insertion
Caution
Remove power to the VM24 before
removing or inserting boards.
24 VM24 I/O Module