Perreaux SXD2 owner manual Rear Panel Functions

Page 12

4

Rear Panel Functions

Analog Outputs

These single-ended (RCA) outputs provide line-level analog audio, via suitable RCA interconnect cables, to a preamplifier or integrated amplifier.

For more information on output specifications, please refer to Chapter 11.

Digital Input

The single-ended (BNC) input accepts a Sony/Philips Digital Interface Standard (SPDIF) digital audio signal from a source component (e.g. Perreaux SXCD CD player, Apple AirPort Express, Sony PlayStation).

The SPDIF standard dictates 75H transmission of the digital audio signal. Use a digital interconnect cable specifically designed with a characteristic impedance of 75H.

A BNC connector has been used in place of the “standard” RCA type, because design limitations mean RCA connectors can never achieve a characteristic impedance of 75H. Refer to Chapter 6 ‘Special Design Features’ for more information on why a BNC connector is used.

If you already have a suitable high-quality digital interconnect equipped with RCA connectors, please use the supplied adaptor to convert the BNC output to RCA.

For more information on input specifications, please refer to Chapter 11.

11

Image 12
Contents Silhouette SXD2 Page This page has intentionally been left blank Introducing Perreaux Silhouette SeriesKey Features Ii Important Safety Instructions Iii Table of Contents Unpacking and Placement Instant Install Congratulations Front Panel Functions Rear Panel Functions When operating the switch down, power is applied to the SXD2 Special Design Philosophies Minimalist Aesthetics Special Design Features Page Page Care and Maintenance Warranty Information Extended Warranty Year Extended Warranty FormRegistration Form Troubleshooting Guide Interconnect cables damaged 11Specifications 6VRMSSignal to Noise Ratio 6VRMS Signal to Noise Ratio A-W eighted 113dB Physical Dimensions Contact Details Installation Notes