2 | Instant Install |
Note:
Caution!
If you are like us, the first thing you will want to do is to play your favourite piece of music through your new SXD2. The following instructions are written to enable you to achieve this as quickly as possible. These are not comprehensive instructions, but are designed to enable you to play music now!
Please take the time to read the SXD2 manual thoroughly as it incorporates many features, which will enhance its operation.
Placement
The SXD2 is a sensitive digital device with a low power amplifier and best results will be achieved when placed away from potential interference from other components and electrical devices, for example AC mains cords/outlets, transformers, high power amplifiers, etc.
Place the SXD2 close or near the source or input component in order to make as short a connection as possible.
Turn off associated components
This minimises the potential to damage any other components when connecting your SXD2 into the system. It is OK to leave your computer running, although make sure your application software is not open.
Switch on SXD2
Insert the power cord supplied into the rear of the SXD2 and into the wall. Switch on the socket at the wall and turn on the power of the SXD2 by setting the power switch down.
Prior to connecting the AC mains, please check the voltage label on the rear panel to ensure that your unit conforms to the power supply in your area. Never attempt to connect the unit to the incorrect voltage.
Select USB input on SXD2
Set the toggle switch at the rear of the SXD2 to select the USB input. Refer to Chapter 4 for Rear Panel information.
8