1Unpacking and Placement
Unpacking Procedure
Note:
Box
Contents
Placing Your SXD2
Ventilation Requirements
The SXD2 is packaged for maximum protection. To open, sit the box upright and cut the reinforced tape at the top of the box. The product can now be removed.
Pull the foam protecting
The SXD2 USB DAC is now unpacked and ready for further installation.
Please retain all packaging material for future transport.
1 x SXD2 USB DAC
1 x Product manual
3 x Performance analysis charts
1 x USB cable
1 x BNC to RCA adaptor
1 x Detachable AC power cord
The SXD2 should generally be placed close to your source or input equipment, thus keeping interconnect cabling between the SXD2 and input component as short as practical. This will reduce the inputs susceptibility to radio frequency interference and the negative effects associated with long cables.
The SXD2 is a digital device incorporating a low power amplifier. Ventilation requirements are not considered an important factor in product placement.
In the event that the SXD2 is to be incorporated into custom cabinetry, please refer to the dimensional information provided in the Physical Dimensions section of the manual (Chapter 12).
7