Paxar Sierra Sport2 manual Lay the printer on its back

Page 22

Use any of the following items to clean the printhead:

♦A soft cloth moistened with isopropyl alcohol.

CAUTION

Use isopropyl alcohol on the interior areas only, never on the exterior.

♦A Monarch Cleaning Pen (part number 114226).

To clean the printhead, platen roller, and supply sensors:

1.Turn off the printer by pressing and holding P until the display is blank.

Note: Do not use sharp objects to remove adhesive or label particles from the printhead area.

2.Push down on the release buttons on both sides of the printer to open the supply door. The supply door should swing open.

Release

Button

3.Lay the printer on its back.

3-2Care & Maintenance

Image 22

Contents Monarch Sierra Sport Printer Canadian D.O.C. Warning B L E O F C O N T E N T S Getting StartedPrinter Options Audience T T I N G S TA R T E DIntroduction Additional DocumentationAbout the Printer’s Power Printer Utilities Unpacking the PrinterInstalling the Battery Ready 4Getting Started Battery and Safety Information 6Getting Started Connecting the Communications Cable Plug the DB9 connector into the DB9 port Using the Display and Buttons Printing10Getting Started Loading for Non-Peel Mode A D I N G S U P P L I E S2Loading Supplies Tearing the Supplies Loading for Peel Mode Peel Bar Release Button Liner separates from the label Cleaning I N T E N a N C ELay the printer on its back Printhead Clearing Label Jams Troubleshooting Common Errors 2710Error Description 4Troubleshooting Printer Specifications E C I F I C AT I O N SOperating Limits Supply Specifications Cable Pin-outs4Specifications Accessory Items Part Number C E S S O R I E S BAC Power Adapter Single Station Battery ChargerFour Station Battery Charger Carrying AccessoriesI N T E R O P T I O N S C BluetoothLinerless 2Printer Options