RuggedCom RX1512 manual Line Modules LM, Module Status LEDs, Ethernet Copper, Ethernet Fiber

2. RuggedBackbone™ Modules

2.1.1. Module Status LEDs

The front panel module status LEDs provide the following information:

LED	Purpose	Description
		I = Power supply is receiving input voltage.
PM	Indicates power supply status.	O = Power supply is providing
		output voltage to the RX1512.
		Green = OK
LM 1 through 2	Indicates the line module status.	Orange = Warning alert
		Red = Configuration error
Table 2.1. Module Status LED Indications

2.2. Line Modules (LM)

The RuggedBackbone™ RX1512 supports two line modules in slots LM1 and LM2. Several types of line modules may be ordered, depending on the type, speed, and number of Ethernet ports required.

The following illustrations show the typical port configurations and connectors available for RX1512 line modules. For complete information on the available line modules, refer to the RuggedBackbone™ RX1512 data sheet.

Only one T1/E1 module may be used per router.

2.2.1. Ethernet - Copper

Figure 2.3. CG01: 2 × 10/100/1000TX RJ45 Figure 2.4. 6TX01: 6 × 10/100/1000TX RJ45

2.2.2. Ethernet - Fiber

Figure 2.5. FX**/FG**: 2 × 100FX/1000SX/1000LX LC Figure 2.6. 4FX**: 4 × 100FC LC

Figure 2.7. FX03: 2 × 100 FX MTRJ Figure 2.8. 4FX03: 4 × 100FX MTRJ

Figure 2.9. FX**: 2 × 100FX SC Figure 2.10. FX**: 2 × 100FX ST

RuggedCom® RuggedBackbone™ 13 RX1512 Installation Guide Rev 105