RuggedCom RX1512 manual EMI And Environmental Type Tests, Test Description Test Levels Severity

5. EMI And Environmental Type Tests

5. EMI And Environmental Type Tests

Test	Description		Test Levels	Severity
				Levels
IEC 61000-4-2	ESD	Enclosure Contact	+/- 8 kV	4
		Enclosure Air	+/- 15 kV	4
IEC 61000-4-3	Radiated RFI	Enclosure Ports	20 V/m	Notea
		Signal ports	+/- 4kV @ 2.5kHz	Notea
IEC 61000-4-4	Burst (Fast Transient)	D.C. Power ports	+/- 4kV	4
		Earth ground ports	+/- 4kV	4
		Signal ports	+/- 4kV line-to-earth,	4
			+/- 2kV line-to-line
IEC 61000-4-5	Surge
		D.C. Power ports	+/- 2kV line-to-earth,	3
			+/- 1kV line-to-line
		Signal ports	10V	3
IEC 61000-4-6	Induced (Conducted) RFI	D.C Power ports	10V	3
		Earth ground ports	10V	3
			40 A/m, continuous,	Notea
IEC 61000-4-8	Magnetic Field	Enclosure Ports	1000 A/m for 1 s
			1000 A/m for 1 s	5
IEC 61000-4-29	Voltage Dips & Interrupts	D.C. Power ports	30% for 0.1s, 60% for	N/A
			0.1s, 100% for 0.05s
		Signal ports	2.5kV common, 1kV	3
			diff. mode@1MHz
IEC 61000-4-12	Damped Oscillatory
		D.C. Power ports	2.5kV common, 1kV	3
			diff. mode@1MHz
IEC 61000-4-16	Mains Frequency Voltage	Signal ports	30V Continuous, 300V for 1s	4
		D.C. Power ports	30V Continuous, 300V for 1s	4
IEC 61000-4-17	Ripple on D.C.	D.C. Power ports	10%	3
	Power Supply
IEC 60255-5	Dielectric Strength	Signal ports	2kVAC (Fail-Safe Relay output)	N/A
		D.C. Power ports	2kVDC	N/A
IEC 60255-5	H.V. Impulse	Signal ports	5kV (Fail-Safe Relay output)	N/A
		D.C. Power ports	5kV	N/A

aRuggedCom-specified severity levels

Table 5.1. IEC 61850-3 EMI Type Tests

RuggedCom® RuggedBackbone™ 40 RX1512 Installation Guide Rev 105