3Com 3 manual Package Contents, Choosing a Suitable, Site

Page 20

20CHAPTER 2: INSTALLING THE SWITCH

procedura di manutenzione, leggere le informazioni di sicurezza riportate nell'Appendice A della presente guida per l'utente.

Package Contents	■	Switch unit
	■	CD-ROM
	■ Getting Started Guide (this guide)
	■	Release Notes
	■	Unit Information Labels
	■	Warranty Information
	■	Power Cord
	■ 2 x Mounting brackets
	■	4 x Screws
	■ 4 x Rubber feet

Choosing a Suitable	The Switch is suited for use on a desktop, either free standing or
Site	mounted in a standard 19-inch equipment rack. Alternatively, the Switch
	can be mounted in a wiring closet or equipment room, as an aggregator
	for other Hubs and Switches. A rack-mounting kit containing two
	mounting brackets is supplied with the Switch.

CAUTION: Ensure that the ventilation holes are not obstructed.

When deciding where to position the Switch, ensure that:

■Cabling is located away from:

■sources of electrical noise such as radios, transmitters and broadband amplifiers.

■power lines and fluorescent lighting fixtures

■The Switch is accessible and cables can be connected easily.

■Water or moisture cannot enter the case of the Switch.

■Air-flow is not restricted around the Switch or through the vents in the side of the Switch. 3Com recommends that you provide a minimum of 25mm (1in.) clearance.

■Air temperature around the Switch does not exceed 40 °C (104 °F).

Image 20

Contents SuperStack 3Com Corporation 350 Campus Drive Marlborough, MA United States Government LegendContents Setting UP for Management PIN-OUTS Page About this Guide Convention Description ConventionsIcon Description Related DocumentationAbout this Guide Introducing About the Switch FamilySwitch 4200 Family Front View DetailIntroducing the Superstack 3 Switch 4200 Family Color Indicates Port Status LEDs 10BASE-T/100BASE-TX ports Port Status LEDs SFP portsPort Status LEDs 10/100/1000BASE-T ports Unit LEDsAlert LED LED Color Indicates Power/Self Test LEDRear View Detail Feature Switch 4200 Family Automatic IP Configuration Duplex ModeRmon Alarm Quality of Service QoSIntroducing the Superstack 3 Switch 4200 Family Installing the Switch Site Package ContentsChoosing a Suitable Rack-mounting Repeat steps 2 and 3 for the other side of the Switch Fitting a bracket for rack-mountingStacking Units Placing Units OnTop of Each Other Power-up Powering-upSwitch 4200 Family SequenceColor State SFP port on the Switch 4200 28-PortSFP Operation Installing the Switch Your Switch ChoosingCorrect Cables TransceiverFiber Cables Cross-over Cable Straight-through CableChoosing the Correct Cables Installing the Switch Setting UP for Management Setting Up Configure IP information manually for your Switch or viewAutomatically configured IP information OverviewManual IP Configuration Automatic IP ConfigurationSetting UP for Management Manually Configuring IP Information Pre-requisitesSetting Up the Switch with IP Information Connecting the Workstation to the SwitchConfiguring the Workstation with IP Information Using Command Line Interface via Telnet Example top-level command line interface menu Connecting a workstation to the Switch via the console port Setting Up the Switch with IP Information Example top-level command line interface menu Automatically Configured IPViewing Viewing Automatically Configured IP Information Viewing IP Information via the Console Port Methods of Managing a Switch Refer to Setting Up Command Line Interface Management on Command Line Network Using TelnetInterface Management CLI Management viaChoosing a Browser Setting Up WebInterface Setting Up Snmp Management Protocol Snmp can manage a Switch ifOver the Network Management workstationDefault Users User Default Access Level Name PasswordSecurity device user modify command on the CLI, or Security Device User Modify operation on the web interfaceSetting UP for Management Problem Solving For Technical Support information, see Appendix DSolving Problems Solutions belowPower LED does not light On powering-up, the Power/Self Test LED lights yellowIP Addressing Solving Communication ProblemsError message indicating that the SFP transceiver is faulty Upgrade Problems Solving StackFormation Solving SoftwareSafety Information Important Safety Information This must be approved for the country where it is usedImportant Safety Information ’information de Sécurité Importante Schko Wichtige Sicherheitsinformationen Vorsicht Europe Información de seguridad importante Schuko Importanti informazioni di sicurezza Avvertenza Lunità deve disporre di messa a terra Prodotto Laser Classe Null Modem Cable PC-AT Serial CablePin to RS-232 25-pin Pin to 9-pinModem Cable RJ-45 PinAssignments Pin Number 10/100 1000Pin Number 10/100 1000 Appendix B PIN-OUTS Switch 4200 26-Port 3C17300A Switch 4200 50-Port 3C17302A Switch 4200 28-Port 3C17304A Appendix C Technical Specifications Services Register YourProduct PurchaseAccess Software TroubleshootOnline DownloadsContact Us US and Canada Telephone Technical Support and Repair Country Telephone NumberLatin America Telephone Technical Support and Repair Index NumbersSFP ports 14 SFP transceiver Regulatory Notices

Related manuals

Manual 103 pages 16.51 Kb