3Com manual Switch 4200 50-Port 3C17302A

Page 74

74APPENDIX C: TECHNICAL SPECIFICATIONS

Switch 4200 50-Port (3C17302A)

Physical Dimensions	Height: 44 mm (1.7 in.) x Width: 440 mm (17.3 in.) x Depth: 274 mm (10.8 in.)
	Weight: 2.83 kg (6.23 lbs)

Environmental Requirements
Operating Temperature	0 ° to 40 °C (32 ° to 104 °F)
Storage Temperature	–40 ° to +70 °C (-40 ° to 158 °F)
Operating Humidity	10–95% relative humidity, non-condensing
Standards	EN60068 to 3Com schedule (Package testing: paras 2.1, 2.2, 2.30, and 2.32.
	Operational testing: paras 2.1, 2.2, 2.30 and 2.13).

Safety
Agency Certifications	UL60950-1, EN60950-1, CSA 22.2 No. 60950-1, IEC 60950-1

EMC
Emissions	CISPR 22 Class A, EN55022 Class A, FCC Part 15 Subpart B Class A,
	ICES-003 Class A, VCCI Class A, EN61000-3-3
Immunity	EN 55024

Heat Dissipation	30 watts maximum (102 Btu/h maximum)

Power Supply
AC Line Frequency	50/60 Hz
Input Voltage	100–240 VAC
Current Rating	1 A (amps)(maximum)

Image 74

Contents SuperStack 3Com Corporation 350 Campus Drive Marlborough, MA United States Government LegendContents Setting UP for Management PIN-OUTS Page About this Guide Convention Description ConventionsIcon Description Related DocumentationAbout this Guide Introducing About the Switch FamilySwitch 4200 Family Front View DetailIntroducing the Superstack 3 Switch 4200 Family Port Status LEDs 10/100/1000BASE-T ports Color Indicates Port Status LEDs 10BASE-T/100BASE-TX portsPort Status LEDs SFP ports Unit LEDsAlert LED LED Color Indicates Power/Self Test LEDRear View Detail Rmon Alarm Feature Switch 4200 Family Automatic IP ConfigurationDuplex Mode Quality of Service QoSIntroducing the Superstack 3 Switch 4200 Family Installing the Switch Site Package ContentsChoosing a Suitable Rack-mounting Repeat steps 2 and 3 for the other side of the Switch Fitting a bracket for rack-mountingStacking Units Placing Units OnTop of Each Other Switch 4200 Family Power-upPowering-up SequenceColor State SFP port on the Switch 4200 28-PortSFP Operation Installing the Switch Correct Cables Your SwitchChoosing TransceiverFiber Cables Cross-over Cable Straight-through CableChoosing the Correct Cables Installing the Switch Setting UP for Management Automatically configured IP information Setting UpConfigure IP information manually for your Switch or view OverviewManual IP Configuration Automatic IP ConfigurationSetting UP for Management Manually Configuring IP Information Pre-requisitesSetting Up the Switch with IP Information Connecting the Workstation to the SwitchConfiguring the Workstation with IP Information Using Command Line Interface via Telnet Example top-level command line interface menu Connecting a workstation to the Switch via the console port Setting Up the Switch with IP Information Example top-level command line interface menu Automatically Configured IPViewing Viewing Automatically Configured IP Information Viewing IP Information via the Console Port Methods of Managing a Switch Refer to Setting Up Command Line Interface Management on Interface Management Command LineNetwork Using Telnet CLI Management viaChoosing a Browser Setting Up WebInterface Over the Network Setting Up SnmpManagement Protocol Snmp can manage a Switch if Management workstationDefault Users User Default Access Level Name PasswordSecurity device user modify command on the CLI, or Security Device User Modify operation on the web interfaceSetting UP for Management Problem Solving For Technical Support information, see Appendix DPower LED does not light Solving ProblemsSolutions below On powering-up, the Power/Self Test LED lights yellowIP Addressing Solving Communication ProblemsError message indicating that the SFP transceiver is faulty Formation Upgrade ProblemsSolving Stack Solving SoftwareSafety Information Important Safety Information This must be approved for the country where it is usedImportant Safety Information ’information de Sécurité Importante Schko Wichtige Sicherheitsinformationen Vorsicht Europe Información de seguridad importante Schuko Importanti informazioni di sicurezza Avvertenza Lunità deve disporre di messa a terra Prodotto Laser Classe Pin to RS-232 25-pin Null Modem CablePC-AT Serial Cable Pin to 9-pinAssignments Modem CableRJ-45 Pin Pin Number 10/100 1000Pin Number 10/100 1000 Appendix B PIN-OUTS Switch 4200 26-Port 3C17300A Switch 4200 50-Port 3C17302A Switch 4200 28-Port 3C17304A Appendix C Technical Specifications Product ServicesRegister Your PurchaseOnline Access SoftwareTroubleshoot DownloadsContact Us US and Canada Telephone Technical Support and Repair Country Telephone NumberLatin America Telephone Technical Support and Repair Index NumbersSFP ports 14 SFP transceiver Regulatory Notices

Related manuals

Manual 103 pages 16.51 Kb